A contractor employee was standing next to a car lift that was lifting an 8-foot snowplow blade into position so it could be loaded into the bed of a pickup truck. The plow blade had been lifted approximately 3 feet off the ground and was secured to the lift with a ratcheting tie-down strap. The employee went to check that the blade had been lifted high enough. The plow blade became unbalanced and fell off the lift, striking the employee's lower leg. The employee was hospitalized with a fractured leg and contusions.
Hospitalized Lower leg(s) Vehicle and machine front attachments
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.
An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.