WELLSVILLE, NY —
OSHA Inspection: BURTON PLUMBING
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of BURTON PLUMBING in WELLSVILLE AIR INDUSTRIAL PARK, DORNOW ROAD, WELLSVILLE, NY 14895 (NAICS 000000). OSHA activity number 106939820.
Where did this inspection happen?
- Establishment
- BURTON PLUMBING
- Site address
- WELLSVILLE AIR INDUSTRIAL PARK, DORNOW ROAD
- City
- WELLSVILLE
- State
- NY
- ZIP
- 14895
- Mailing
- 220 WEST STATE STREET, OLEAN, NY 14760
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 1711
- Employees
- 2
- Ownership type
- A
- Industry flags
- Construction safety.
Citations
15 citations on file for this inspection.
5(a)(1)
- Issued
- Abate by
- Penalty
- Initial $750.00 · Current $525.00 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) Speculation building at the Wellsville Air Industrial Park, A Ridgid 300 portable pipe threading machine which was activated by a 3-way sliding power switch that would not automatically shut-off if the operator was inadvertently caught up in the machine's rotating parts. Among other methods, one feasible and acceptable method to reduce this hazard is to establish and enforce adequate safe operating procedures, such as those stipulated in the American National Standard for Portable Pipe Threading Machines (ANSI B208.1-1982). Elements essential to an acceptable safe operating procedure include at a minimum: 1) Installation of a momentary contact device (deadman foot switch) to control power input to the machine. This device would automatically stop the machine and the rotating pipe if the operator's foot was removed from the switch for any reason. 2) Provide training and education to the machine operators concerning all the appropriate procedures for the safe operation and use of this type of equipment. ABATEMENT CERTIFICATION REQUIREDATION
Recent events (2)
- — I (S) $525.00
- — Z (S) $750.00
1926.451 B01
- Issued
- Abate by
- Penalty
- Initial $600.00 · Current $420.00 Reduced
Recent events (2)
- — I (S) $420.00
- — Z (S) $600.00
1926.452 W01
- Issued
- Abate by
1926.451 B10
- Issued
- Abate by
- Penalty
- Initial $600.00 · Current $420.00 Reduced
Recent events (2)
- — I (S) $420.00
- — Z (S) $600.00
1926.451 B11
- Issued
- Abate by
1926.452 C03
- Issued
- Abate by
1926.451 F07
- Issued
- Abate by
- Penalty
- Initial $600.00 · Current $420.00 Reduced
Recent events (2)
- — I (S) $420.00
- — Z (S) $600.00
1926.454 A01
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1926.454 A02
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1926.451 G01
- Issued
- Abate by
- Penalty
- Initial $600.00 · Current $420.00 Reduced
Recent events (2)
- — I (S) $420.00
- — Z (S) $600.00
1926.501 B01
- Issued
- Abate by
- Penalty
- Initial $600.00 · Current $420.00 Reduced
Recent events (2)
- — I (S) $420.00
- — Z (S) $600.00
1910.1200 E01
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.1200 G08
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.1200 H01
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1926.403 B02
- Issued
- Abate by
More inspections at BURTON PLUMBING
MILLARD, NE—2014-02-06 00:00:00
BURTON PLUMBING
View BURTON PLUMBING's full OSHA safety record →
More inspections in this industry (NAICS 000000)
SCHENECTADY, NY—2012-01-05 00:00:00
BRUCE D. BOWMAN
BILLINGS, MT—2005-01-25 00:00:00
KGC, INC.
ROCKAWAY, NJ—2002-12-31 00:00:00
ROCKAWAY BOROUGH DPW
FOREST CITY, NC—2002-12-31 00:00:00
HARRY BRICKEY DBA A. BRICKEY CEILING COMPANY
EDGERTON, KS—2002-12-31 00:00:00
SUDDEN BOND INDUSTRIES
More inspections in NY
MAYVILLE, NY—2026-07-16
MAYVILLE VILLAGE DPW
NEW HYDE PARK, NY—2026-07-16
NORTH HEMPSTEAD TN MICHAEL J TULLY PARK
CONESUS, NY—2026-07-16
CONESUS TN HIGHWAY DEPT
COMSTOCK, NY—2026-07-15
NYSDOCCS WASHINGTON CORRECTIONAL FACILITY
BALDWINSVILLE, NY—2026-07-15
LYSANDER TOWN HIGHWAY DEPARTMENT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 106939820.