FRIENDSWOOD, TX —
OSHA Inspection: ACME WELDING & FABRICATING, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of ACME WELDING & FABRICATING, INC. in 18517 W.CLOVER LANE, FRIENDSWOOD, TX 77546 (NAICS 000000). OSHA activity number 116261678.
Where did this inspection happen?
- Establishment
- ACME WELDING & FABRICATING, INC.
- Site address
- 18517 W.CLOVER LANE
- City
- FRIENDSWOOD
- State
- TX
- ZIP
- 77546
- Mailing
- P.O. BOX 1047R LANE, FRIENDSWOOD, TX 77549
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 1799
- Employees
- 10
- Ownership type
- A
Citations
18 citations on file for this inspection.
5(a)(1)
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $235.00 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to employees in that employees were exposed to the hazards of developing undetected cases of silicosis from being exposed to unknown concentrations of crystalline silica: (a)At the facility, where a sandblaster was exposed to silica, containing 26% crystalline quartz, at an 8-hour time weighted average of 1.65 mg/m3. The acceptable permissible exposure limit for silica with 26crystalline quartz is 0.357 mg/m3. Sampling was conducted for 125 minutes during the work shift on 11/03/98. Zero exposure was assumed for the remaining 355 minutes. Feasible methods of abatement may include, but are not limited to: 1. Medical surveillance, including: a. A baseline examination which includes a medical and occupational history to elicit data on signs and symptoms of respiratory disease prior to exposure to crystalline silica. The medical examination emphasizing the respiratory system should be repeated every five years if under 20 years of exposure and every two years if over 20 years of exposure. The medical examination should be repeated more frequently if respiratory symptoms develop or upon the recommendation of the examining physician. b. A baseline chest chest X-ray should be obtained prior to employement with a follow- up every five years if under 20 years of exposure and every two years if over 20 years of exposure. A chest X-ray may be required more frequently if determined by the examining physician. c. Pulmonary Function Tests (PFT): Should include FEV (forced expiratory volume in 1 second), FVC (forced vital capacity) and DLCO (diffusion lung capacity). PFTs should be obtained for a baseline examination with PFTs repeated every five years if under 20 years of exposure and every two years if over 20 years of exposure. PFTs may be required more frequently if respirable symptoms develop or if recommended by the examining physician. d. A chest X-ray should be obtained upon employment termination.
Recent events (2)
- — I (S) $235.00
- — Z (S) $375.00
1926.21 B02
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $235.00 Reduced
Recent events (2)
- — I (S) $235.00
- — Z (S) $375.00
1926.21 B06 I
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $235.00 Reduced
Recent events (2)
- — I (S) $235.00
- — Z (S) $375.00
1926.51 F04 I
- Issued
- Abate by
- Penalty
- Initial $225.00 · Current $112.00 Reduced
Recent events (2)
- — I (S) $112.00
- — Z (S) $225.00
1926.51 I
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1926.52 D01
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $235.00 Reduced
Recent events (2)
- — I (S) $235.00
- — Z (S) $375.00
1926.55 A
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $235.00 Reduced
Recent events (2)
- — I (S) $235.00
- — Z (S) $375.00
1926.55 B
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1926.101 B
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $236.00 Reduced
Recent events (2)
- — I (S) $236.00
- — Z (S) $375.00
1926.200 A
- Issued
- Abate by
- Penalty
- Initial $225.00 · Current $112.00 Reduced
Recent events (2)
- — I (S) $112.00
- — Z (S) $225.00
1926.33 G01 I
- Issued
- Abate by
- Penalty
- Initial $150.00 · Current $75.00 Reduced
Recent events (2)
- — I (O) $75.00
- — Z (O) $150.00
1926.33 G01 II
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1926.33 G01 III
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.134 C01
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.134 D01 III
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.134 E01
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.134 F02
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.134 K01
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
More inspections at ACME WELDING & FABRICATING, INC.
FRIENDSWOOD, TX—1999-03-25 00:00:00
ACME WELDING & FABRICATING, INC.
FRIENDSWOOD, TX—1985-03-29 00:00:00
ACME WELDING & FABRICATING INC
FRIENDSWOOD, TX—1985-02-12 00:00:00
ACME WELDING & FABRICATING INC
Friendswood, TX—1982-02-23 00:00:00
ACME WELDING & FABRICATING INC
View ACME WELDING & FABRICATING, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
SCHENECTADY, NY—2012-01-05 00:00:00
BRUCE D. BOWMAN
BILLINGS, MT—2005-01-25 00:00:00
KGC, INC.
ROCKAWAY, NJ—2002-12-31 00:00:00
ROCKAWAY BOROUGH DPW
FOREST CITY, NC—2002-12-31 00:00:00
HARRY BRICKEY DBA A. BRICKEY CEILING COMPANY
EDGERTON, KS—2002-12-31 00:00:00
SUDDEN BOND INDUSTRIES
More inspections in TX
WICHITA FALLS, TX—2026-07-16
UNITED RENTALS, INC.
SAN MARCOS, TX—2026-07-16
CASA MECHANICAL SERVICES, LTD.
CLARKSVILLE, TX—2026-07-15
SEQUOIAS TREE EXPERT LLC
EL PASO, TX—2026-07-15
SURE STEEL
CORPUS CHRISTI, TX—2026-07-15
NORTH STAR ENERGY SOLUTIONS LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 116261678.