NORTH LITTLE ROCK, AR —
OSHA Inspection: ONE SOURCE HOME AND BUILDING CENTER
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ONE SOURCE HOME AND BUILDING CENTER in 400 E. 13TH STREET, NORTH LITTLE ROCK, AR 72114 (NAICS 000000). OSHA activity number 117972265.
Watch ONE Source Home AND Building Center — free
Get an email when a new federal OSHA severe-injury report for ONE Source Home AND Building Center is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- ONE SOURCE HOME AND BUILDING CENTER
- Site address
- 400 E. 13TH STREET
- City
- NORTH LITTLE ROCK
- State
- AR
- ZIP
- 72114
- Mailing
- P. O. BOX 99, NORTH LITTLE ROCK, AR 72115
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 5211
- Employees
- 64
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
26 citations on file for this inspection.
5(a)(1)
- Issued
- Abate by
- Penalty
- Initial $1750.00 · Current $600.00 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: At the facility, operators drove forklifts that were not equipped with seat belts or drove forklifts equipped with seat belts that were unbuckled in the following instances; a) in the Warehouse, Nissan lift, model #CEF02A25V, which was not equipped with a seat belt; b) in the Warehouse, Daewoo lift, serial # 90-02424, with the seat belt hidden beneath the rear of the seat; c) at the Door shop, Caterpillar lift, serial # 86W00960, which was not equipped with a seat belt; d) at the Door shop, Daewoo lift, model D255, which was equipped with a seat belt; e) in the Garage, Caterpillar lift, serial # 2N2495, which was not equipped with a seat belt. This practice exposed the operators to the hazard of being ejected and crushed by the machine in a roll-over accident. Among other methods, one feasible and acceptable abatement method to correct this hazard is to require the operators to wear their seat belts at all times when they are sitting in the seat of the powered industrial trucks, regardless of the length of time that they will be in the seat. Another feasible method is to retrofit the lifts with seat/seat belt units which are offered by the manufacturer, afterwards, requiring the operators to wear the belts at all times when they are sitting in the seat of the forklift.
Recent events (2)
- — I (S) $600.00
- — Z (S) $1750.00
1910.178 L04 IIA
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
5(a)(1)
- Issued
- Abate by
- Penalty
- Initial $1750.00
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: At the facility, operators drove forklifts that were not equipped with seat belts or drove forklifts equipped with seat belts that were unbuckled in the following instances; a) in the Warehouse, Nissan lift, model #CEF02A25V, which was not equipped with a seat belt; b) in the Warehouse, Daewoo lift, serial # 90-02424, with the seat belt hidden beneath the rear of the seat; c) at the Door shop, Caterpillar lift, serial # 86W00960, which was not equipped with a seat belt; d) at the Door shop, Daewoo lift, model D255, which was equipped with a seat belt; e) in the Garage, Caterpillar lift, serial # 2N2495, which was not equipped with a seat belt. This practice exposed the operators to the hazard of being ejected and crushed by the machine in a roll-over accident. Among other methods, one feasible and acceptable abatement method to correct this hazard is to require the operators to wear their seat belts at all times when they are sitting in the seat of the powered industrial trucks, regardless of the length of time that they will be in the seat. Another feasible method is to retrofit the lifts with seat/seat belt units which are offered by the manufacturer, afterwards, requiring the operators to wear the belts at all times when they are sitting in the seat of the forklift.
Recent events (2)
- — I (S)
- — Z (S) $1750.00
5(a)(1)
- Issued
- Abate by
- Penalty
- Initial $1750.00 · Current $625.00 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: At the facility, an employee operated a Homelite 20-inch bar chain saw without the benefit of a chain brake, a reduced kickback chain, or a bar tip guard, a condition that exposed him to the hazard of being struck by the chain in the event of a kickback. ANSI B175.1-1991 "Safety Requirements for Gasoline-Powered Chain Saws" requires saws that have less than a 3.8 cubic inch displacement engine be equipped with at least two devices to reduce the risk of kickback injury, such as a chain brake, a low kickback chain, a reduced kickback bar, or a bar tip guard that covers the kickback area of the bar and chain. Among other methods, one feasible and acceptable abatement method to correct this hazard is to purchase only those chain saws equipped with chain brakes or bar tip guards. A second feasible and acceptable abatement method to correct this hazard is to retrofit the saw with a chain brake from the manufacturer. A third feasible and acceptable abatement method to correct this hazard is to equip the saw with a reduced kickback bar and a low kickback chain.ck
Recent events (2)
- — I (S) $625.00
- — Z (S) $1750.00
1910.178 L04 IIA
- Issued
- Abate by
- Penalty
- Initial $1750.00
Recent events (2)
- — I (S)
- — Z (S) $1750.00
1910.213 A11
- Issued
- Abate by
- Penalty
- Initial $1750.00 · Current $625.00 Reduced
Recent events (2)
- — I (S) $625.00
- — Z (S) $1750.00
1910.213 C01
- Issued
- Abate by
- Penalty
- Initial $1400.00 · Current $500.00 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1400.00
1910.213 H01
- Issued
- Abate by
- Penalty
- Initial $1750.00 · Current $500.00 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1750.00
1910.213 H03
- Issued
- Abate by
- Penalty
- Initial $1750.00
Recent events (2)
- — I (S)
- — Z (S) $1750.00
1910.213 H04
- Issued
- Abate by
- Penalty
- Initial $1750.00
Recent events (2)
- — I (S)
- — Z (S) $1750.00
1910.215 A04
- Issued
- Abate by
- Penalty
- Initial $1050.00 · Current $400.00 Reduced
Recent events (2)
- — I (S) $400.00
- — Z (S) $1050.00
1910.215 B09
- Issued
- Abate by
- Penalty
- Initial $1050.00
Recent events (2)
- — I (S)
- — Z (S) $1050.00
1910.304 F05 V
- Issued
- Abate by
- Penalty
- Initial $3500.00
Recent events (2)
- — I (S)
- — Z (S) $3500.00
1910.334 A02 I
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1910.305 B01
- Issued
- Abate by
- Penalty
- Initial $3500.00 · Current $1500.00 Reduced
Recent events (2)
- — I (S) $1500.00
- — Z (S) $3500.00
1910.305 B02
- Issued
- Abate by
- Penalty
- Initial $1400.00
Recent events (2)
- — I (S)
- — Z (S) $1400.00
1910.334 A03 II
- Issued
- Abate by
- Penalty
- Initial $1750.00 · Current $625.00 Reduced
Recent events (2)
- — I (S) $625.00
- — Z (S) $1750.00
1910.215 B09
- Issued
- Abate by
- Penalty
- Initial $1050.00
Recent events (2)
- — I (S)
- — Z (S) $1050.00
1910.304 F05 V
- Issued
- Abate by
- Penalty
- Initial $3500.00
Recent events (2)
- — I (S)
- — Z (S) $3500.00
1910.305 B02
- Issued
- Abate by
- Penalty
- Initial $1400.00
Recent events (2)
- — I (S)
- — Z (S) $1400.00
1910.334 A02 I
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1910.213 H03
- Issued
- Abate by
- Penalty
- Initial $1750.00
Recent events (2)
- — I (S)
- — Z (S) $1750.00
1910.213 H04
- Issued
- Abate by
- Penalty
- Initial $1750.00
Recent events (2)
- — I (S)
- — Z (S) $1750.00
1910.94 B05 V
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.213 B03
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.303 F
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
More inspections at ONE SOURCE HOME AND BUILDING CENTER
NORTH LITTLE ROCK, AR—2001-02-28 00:00:00
ONE SOURCE HOME AND BUILDING CENTER
View ONE SOURCE HOME AND BUILDING CENTER's full OSHA safety record →
More inspections in this industry (NAICS 000000)
SCHENECTADY, NY—2012-01-05 00:00:00
BRUCE D. BOWMAN
BILLINGS, MT—2005-01-25 00:00:00
KGC, INC.
ROCKAWAY, NJ—2002-12-31 00:00:00
ROCKAWAY BOROUGH DPW
FOREST CITY, NC—2002-12-31 00:00:00
HARRY BRICKEY DBA A. BRICKEY CEILING COMPANY
EDGERTON, KS—2002-12-31 00:00:00
SUDDEN BOND INDUSTRIES
More inspections in AR
SILOAM SPRINGS, AR—2026-07-15
CR CRAWFORD CONSTRUCTION LLC
VAN BUREN, AR—2026-07-14
MILLAR PARTNERS, LLC
BRINKLEY, AR—2026-07-14
ROGER WILKISON FARMS PARTNERSHIP
SEARCY, AR—2026-07-14
MASTER?S PLASTERING & MORE INC
LITTLE ROCK, AR—2026-07-09
NABHOLZ CONSTRUCTION CORPORATION
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 117972265.