Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: MATTESON MARINE SERVICE, INC.

Accident-driven inspection · Safety discipline

On , OSHA opened an accident-driven safety inspection of MATTESON MARINE SERVICE, INC. in 2815 91ST AVE., BURLINGTON, IA 52601 (NAICS 488330). OSHA activity number 301554960.

Watch Matteson Marine Service, INC. — free Get an email when a new federal OSHA severe-injury report for Matteson Marine Service, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2815 91ST AVE.
City
BURLINGTON
State
IA
ZIP
52601
Mailing
# 1 SOUTH POINT, BURLINGTON, IA 52601
Inspection type
Accident-driven (A)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
488330
SIC code (legacy)
4492
Employees
21
Ownership type
A

2 citations on file for this inspection.

5(a)(1)

Serious Gravity 03 1 instance 14 exposed
Issued
Abate by
Penalty
Initial $1000.00 · Current $500.00 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to:
(a)The hazards of falls likely to cause broken bones while using
ladders such as, but not limited to a Werner Type III Model
D1128-2 extension ladder, when the combined weight of the
employee using the portable ladder and any tools and supplies
carried by the employee exceeded the maximum intended load of
the ladder.
Among other methods, one feasible and acceptable abatement method to
correct this hazard is
to comply with the ladder manufacturer's written instructions and
warnings, including those
instructions and warnings printed on the ladder regarding the maximum
intended load of the
ladder.
IN THE ALTERNATIVE:
29 CFR 1915.72(a)(4):  Manufactured portable metal ladders provided by the
employer were
not in accordance with the provisions of ANSI Standard A14.2-1972: Safety
Requirements for
Portable Metal Ladders:
(a)At the O'Connell Slough barge cleaning area, Mile 405, UMR,
right bank; a Werner Type III Model D1128-2 extension ladder,
marked by its manufacturer as having a 200 pound duty rating,
was used by employee(s) to enter and clean a steel hopper barge
when the combined weight of the employee using the portable
ladder and any tools and supplies carried by the employee
exceeded the maximum intended load of the ladder.  The ANSI
Standard A14.2-1972: Safety Requirements for Portable Metal
Ladders (incorporated by reference) states that, "A light duty
(Type III) ladder shall be capable of supporting a 200 pound load."
The referenced document states that light duty ladders such as this
Werner Type III Model D1128-2 extension ladder are "For users
requiring no more than 200 pound load capacity or service
requirement such as general household use" and "Users should
give consideration to the length required, the type of loading, and
the service to which it will be subjected.  Never overload a
ladder."
Recent events (3)
  • — F (S) $500.00
  • — A (S) $500.00
  • — Z (S) $1000.00

1915.152 E01

Serious Gravity 03 1 instance 14 exposed
Issued
Abate by
Penalty
Initial $1000.00 · Current $350.00 Reduced
Recent events (2)
  • — F (S) $350.00
  • — Z (S) $1000.00

View MATTESON MARINE SERVICE, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 301554960.