AMITE, LA —
OSHA Inspection: JOE HALL DBA HALL'S METAL STRUCTURES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JOE HALL DBA HALL'S METAL STRUCTURES in HIGHWAY 16, AMITE, LA 70422 (NAICS 238120). OSHA activity number 307595702.
Where did this inspection happen?
- Establishment
- JOE HALL DBA HALL'S METAL STRUCTURES
- Site address
- HIGHWAY 16
- City
- AMITE
- State
- LA
- ZIP
- 70422
- Mailing
- 233 IDLE ACRES LN, AMITE, LA 70422
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238120
- SIC code (legacy)
- 1791
- Employees
- 4
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Abate by
- Penalty
- Initial $750.00 · Current $375.00 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a fall hazard: a) Employee(s) were observed performing steel working operations while elevated on a work platform suspended on the forks of a Model 6034 SkyTrack Rough Terrain Forklift. The following hazards were observed: 1. Employees were observed working from a twenty foot (240 inches) long work platform and this dimension exceeded the maximum allowable width of 118 inches for this Skytrack machine (width of Skytrack Model 6034 is 98 inches). 2. The work platform did not have the maximum work load and the empty weight of the platform available. One feasible method of correcting these hazards is to implement and follow American Society of Mechanical Engineers (ASME) B56.6-2002 (Safety Standard for Rough Terrain Forklift Trucks) Section 8.24; Platforms for Elevating Personnel: 8.24.1(b): Use a work platform that is no longer than the width of the machine plus 10 inches on each side of the machine. 8.24.1(f)(1): Ensure that the work platform used has the maximum work load prominently indicated on the platform. 8.24.1(f)(2): Ensure that the work platform used has the weight of the empty platform prominently displayed on the platform. DISCLAIMERS: 1) You are not limited to the abatement methods suggested above. 2) The methods explained are general and may not be effective in all cases. 3) The employer is responsible for selecting and carrying out an appropriate method.
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1926.451 C02 V
- Issued
- Abate by
- Penalty
- Initial $750.00 · Current $375.00 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1926.451 G01
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1926.404 F06
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
More inspections in this industry (NAICS 238120)
EL PASO, TX—2026-07-15
SURE STEEL
NAMPA, ID—2026-07-15
ELITE STEEL ERECTORS, LLC
GARDENDALE, AL—2026-07-09
ANDINO'S IRON WORKERS, LLC
MIDLOTHIAN, VA—2026-07-09
B & J STEEL CONSTRUCTION, INC.
LYNCHBURG, VA—2026-07-09
GRAY'S WELDING LLC
More inspections in LA
LAFAYETTE, LA—2026-07-15
GULLEY'S WELDING & STEEL ERECTORS, INC.
LAFAYETTE, LA—2026-07-15
ACORREA COMPANY, LLC
LAFAYETTE, LA—2026-07-14
GULF COAST WOODWORK, L.L.C.
BELLE ROSE, LA—2026-07-14
OXYCHEM
AMELIA, LA—2026-07-10
CONRAD SHIPYARD, LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 307595702.