Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: WINDSOR MACHINERY CO., INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of WINDSOR MACHINERY CO., INC. in MAIN ST., WAPPINGERS FALLS, NY 12590 (NAICS 236220). OSHA activity number 310522354.

Watch Windsor Machinery CO., INC. — free Get an email when a new federal OSHA severe-injury report for Windsor Machinery CO., INC. is published. One employer, no account, unsubscribe in one click.
Site address
MAIN ST.
City
WAPPINGERS FALLS
State
NY
ZIP
12590
Mailing
16 ORBIT LANE, HOPEWELL JCT., NY 12533
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
SIC code (legacy)
1542
Employees
5
Ownership type
A

9 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1500.00 · Current $500.00 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that:
a)Jobsite - on or about August 15, 2007 - an employee sustained fractures
after a
fall of approximately 30 feet while engaged in the placement of concrete,
guiding the
delivery of the concrete with the end hose of the concrete pump truck.
The employee
was working adjacent to the end of the concrete pump hose while the pump
was started
and restarted.  This is a violation of The Concrete Pump Manufacturers
Association
procedures for safe operation, Safety Standard for Concrete Pumps, Placing
Booms and
Delivery Systems, Section 27-1.18.2.2
Methods to correct this hazard include, but are not limited to:  1)
Develop and implement a
comprehensive training program for employees working in the vicinity of
this equipment.  2)
Follow the procedures outlined in the Concrete Pump Manufacturers
Association's Safety
Standard, under the heading of Operator Information, 27-1.18.2.2
paragraph# 10, which states;
"Personnel should be cleared from the area of the end hose when starting
or restarting the
pump".
ABATEMENT CERTIFICATION REQUIRED FOR THIS ITEM.
Recent events (2)
  • — I (S) $500.00
  • — Z (S) $1500.00

1926.20 B01

Serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $1500.00 · Current $500.00 Reduced
Recent events (2)
  • — I (S) $500.00
  • — Z (S) $1500.00

1926.451 B02

Serious Gravity 01 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $450.00 · Current $500.00
Recent events (2)
  • — I (S) $500.00
  • — Z (S) $450.00

1926.453 A02

Deleted Serious Gravity 03 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $750.00 · Current $750.00
Recent events (2)
  • — I (S) $750.00
  • — Z (S) $750.00

1926.454 A

Serious Gravity 01 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $450.00 · Current $500.00
Recent events (2)
  • — I (S) $500.00
  • — Z (S) $450.00

1926.502 B05

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1500.00 · Current $500.00 Reduced
Recent events (2)
  • — I (S) $500.00
  • — Z (S) $1500.00

1926.502 B09

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1500.00 · Current $500.00 Reduced
Recent events (2)
  • — I (S) $500.00
  • — Z (S) $1500.00

1926.503 A01

Serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $1500.00 · Current $500.00 Reduced
Recent events (2)
  • — I (S) $500.00
  • — Z (S) $1500.00

1926.1060 A

Other-than-serious Gravity 01 1 instance 5 exposed
Issued
Abate by
Recent events (2)
  • — I (O)
  • — Z (O)

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 310522354.