Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: JOSE A MEDINA INC DBA SUPERMERCADO ECONO

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of JOSE A MEDINA INC DBA SUPERMERCADO ECONO in AVE VICTORIA 531, AGUADILLA, PR 00603 (NAICS 445110). OSHA activity number 311386817.

Watch Jose A Medina INC DBA Supermercado Econo — free Get an email when a new federal OSHA severe-injury report for Jose A Medina INC DBA Supermercado Econo is published. One employer, no account, unsubscribe in one click.
Site address
AVE VICTORIA 531
City
AGUADILLA
State
PR
ZIP
00603
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
445110
SIC code (legacy)
5141
Employees
70
Ownership type
A

4 citations on file for this inspection.

6A0001

Serious Gravity 02 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $700.00 · Current $350.00 Reduced
Section 6(a) of the Puerto Rico Occupational Safety and Health Act:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards
that were causing or likely to cause death or physical harm to employees
in that employees
were exposed to:
Seccion 6(a) de la Ley de Seguridad y Salud en el Trabajo de Puerto Rico:
El patrono no
proveyo empleo y un sitio de empleo libre de riesgos reconocidos que esten
causando o que
puedan causar muerte o dano fisico a los empleados, por cuanto empleados
estaban expuestos
a:
Hand and finger cuts.
a)At Econo Supermarket, butchers shop - Employees were operating a Hobart
6614 Series Meat Saw (no other identiable information), with the traveling
mechanism support of carriage tray broken, making the carriage difficult to
move and unstable.
"AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE
ABATEMENT METHOD TO CORRECT THIS HAZARD IS TO REPAIR
THE TRAVELING MECHANISM OF CARRIAGE TRAY.
b)At Econo Supermarket, butchers shop - Employees hold their hands near the
cutting edge of the saw blade when slicing short ends of meat on a Hobart
6614 Series Meat Saw.  The Hobart 6614 Series Meat Saw is provided with a
pusher plate that is used to meat against the gauge plate when slicing
short
ends but the referenced meat saw was not equipped with it.
"AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE
ABATEMENT METHOD TO CORRECT THIS HAZARD IS TO EQUIPPED
THE MEAT SAW WITH THE PUSHER PLATE"
Cortadura de manos y dedos.
a)En el Supermercado Econo, Carniceria - Empleados estaban operando una
Sierra de Carne Hobart de la Serie 6614 (ninguna otra informacion
identificable), con el soporte del mecanismo de movimiento de la bandeja
movible roto, haciendo el carro dificil de mover e inestable.
"ENTRE OTROS METODOS, UN M(TODO VIABLE Y ACEPTABLE
PARA CORREGIR ESTE RIESGO ES REPARAR EL MECANISMO DE
MOVIMIENTO DE LA BANDEJA MOVIBLE"
b)En el Supermercado Econo, Carniceria - Empleados mantenian sus manos
cerca del lado cortante de la hoja de la sierra cuando rebanaban extremos
cortos de carne en la Sierra de Carne Hobar de la serie 6614.  La Sierra de
Carne Hobart Serie 6614 es provista con un plato para empujar que es
usadopara sostener la carne contra el plato calibrador cuando se rebanan
extremos
cortos, pero la sierra de referencia no estaba equipado con el mismo.
"ENTRE OTROS M(TODOS, UN M(TODO VIABLE Y ACEPTABLE
PARA CORREGIR ESTE RIESGO ES EQUIPAR LA SIERRA DE CARNE
CON EL PLATO PARA EMPUJAR"
Recent events (2)
  • — I (S) $350.00
  • — Z (S) $700.00

1910.212 A03 II

Serious Gravity 02 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $700.00 · Current $350.00 Reduced
Recent events (2)
  • — I (S) $350.00
  • — Z (S) $700.00

1910.305 J01 I

Other-than-serious Gravity 02 2 instances 6 exposed
Issued
Abate by
Penalty
Initial $700.00
Recent events (2)
  • — I (O)
  • — Z (S) $700.00

1910.37 A04

Other-than-serious Gravity 01 1 instance 3 exposed
Issued
Abate by

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311386817.