OSHA Inspection: PRECISION SHAPES, INC. DBA PRECISION WIRE SHAPES

Issued

2009-08-24 00:00:00

Abate by

2009-09-26 00:00:00

Penalty

Initial $1500.00 · Current $750.00 Reduced

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm in that
employees were exposed
to being struck by and/or crushed by metal parts being moved:
(a) PRODUCTION AREA -- PERIODIC INSPECTIONS WERE NOT CONDUCTED ON A
1/2-TON COFFING HOIST AS SPECIFIED BY THE MANUFACTURER.
Among other methods, a feasible and acceptable means to correct the hazard
is to follow the
manufacturer's/owner's manual recommendations for frequent and periodic
inspection(s) of each
type of hoist used, and/or to establish and follow a program of frequent
and periodic
inspection(s) of the hoists in accordance with ASME B30.16-2003, American
Society of
Mechanical Engineers for Overhead Hoists (Underhung), Section
B30.16-2.1.5.
ABATEMENT DOCUMENTATION IS REQUIRED --  29 CFR 1903.19(c)(1) requires
certification that the abatement of the above violation is completed and
29 CFR 1903.19(d)
requires documentation demonstrating that abatement has been completed.

Issued

2009-08-24 00:00:00

Abate by

2009-09-26 00:00:00

Penalty

Initial $1500.00 · Current $750.00 Reduced

Issued

2009-08-24 00:00:00

Abate by

2009-09-26 00:00:00

Penalty

Initial $750.00 · Current $375.00 Reduced

Issued

2009-08-24 00:00:00

Abate by

2009-09-26 00:00:00

Penalty

Initial $1500.00 · Current $750.00 Reduced

Issued

2009-08-24 00:00:00

Abate by

2009-09-26 00:00:00

Penalty

Initial $750.00 · Current $375.00 Reduced

Issued

2009-08-24 00:00:00

Abate by

2009-09-26 00:00:00