OSHA Inspection: AMERICAN COATING LP

Issued

2010-01-28 00:00:00

Abate by

2010-02-02 00:00:00

Penalty

Initial $1250.00 · Current $1250.00

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish to each of his employees a place of employment which was free from
recognized hazards
that were causing or likely to cause death or serious physical harm to
employees in that
employees were exposed to a stuck-by hazard by operating a SPANCO 2-ton
overhead
underhung crane at the Fill Out Station with the emergency stop button
missing from the
pendant.
Among other methods, one feasible and acceptable method to correct this
hazard is to
have the employer repair the pendant in accordance with ASME B30.11-1998
Section 11-
2.3.3(d)(3).
DISCLAIMERS:
1) You are not limited to the abatement methods suggested above.
2) The methods explained are general and may not be effective in all cases.
3) The employer is responsible for selecting and carrying out an
appropriate
method.iate

Issued

2010-01-28 00:00:00

Abate by

2010-02-02 00:00:00

Penalty

Initial $1250.00 · Current $1250.00

General-duty citation text

employer did not
furnish to each of his employees a place of employment which was free from
recognized hazards
that were causing or likely to cause death or serious physical harm to
employees in that
employees were exposed to a stuck-by hazard by operating a SPANCO 2-ton
overhead
underhung crane at the Fill Out Station without the functions of the
controller pendant buttons
being legible.
Among other methods, one feasible and acceptable method to correct this
hazard is to
have the employee wear clean disposable gloves when handling the pendant
to prevent
paint from contaminating the pendant. The pendant should be repaired in
accordance with
ASME B30.11-1998 Section 11-2.3.3(d)(5) to identify all functions.
DISCLAIMERS:
1) You are not limited to the abatement methods suggested above.
2) The methods explained are general and may not be effective in all cases.
3) The employer is responsible for selecting and carrying out an
appropriate method.iate

Issued

2010-01-28 00:00:00

Abate by

2010-02-02 00:00:00

Penalty

Initial $1250.00 · Current $1250.00

General-duty citation text

employer did not
furnish to each of his employees a place of employment which was free from
recognized hazards
that were causing or likely to cause death or serious physical harm to
employees in that
employees were exposed to a struck-by hazard by operating a 2-ton SPANCO
overhead
underhung crane at the Fill Out Station without periodic/frequent
inspections being conducted
and documented.
Among other feasible methods, one feasible method to correct this hazard
would be to
inspect the crane/hoist assembly and have the report maintained in
accordance with
ASME B30.11-1998 Section 11-2.2.1.
DISCLAIMERS:
1) You are not limited to the abatement methods suggested above.
2) The methods explained are general and may not be effective in all cases.
3) The employer is responsible for selecting and carrying out an
appropriate method.

Issued

2010-01-28 00:00:00

Abate by

2010-02-05 00:00:00

Penalty

Initial $1000.00 · Current $1000.00

Issued

2010-01-28 00:00:00

Abate by

2010-02-05 00:00:00

Penalty

Initial $1000.00 · Current $1000.00

Issued

2010-01-28 00:00:00

Abate by

2010-02-05 00:00:00

Issued

2010-01-28 00:00:00

Abate by

2010-02-05 00:00:00

Penalty

Initial $1250.00 · Current $1250.00

Issued

2010-01-28 00:00:00

Abate by

2010-02-05 00:00:00

Penalty

Initial $500.00 · Current $500.00

Issued

2010-01-28 00:00:00

Abate by

2010-02-01 00:00:00