Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: JGK ENTERPRISES INC. DBA AMERICAN GRANITE & MARBLE

Accident-driven inspection · Safety discipline

On , OSHA opened an accident-driven safety inspection of JGK ENTERPRISES INC. DBA AMERICAN GRANITE & MARBLE in 6075 COCHRAN RD., SUITE C, SOLON, OH 44139 (NAICS 327991). OSHA activity number 314066747.

Watch JGK Enterprises INC. DBA American Granite & Marble — free Get an email when a new federal OSHA severe-injury report for JGK Enterprises INC. DBA American Granite & Marble is published. One employer, no account, unsubscribe in one click.
Site address
6075 COCHRAN RD., SUITE C
City
SOLON
State
OH
ZIP
44139
Mailing
7325 FAIROAKS RD., OAKWOOD VILLAGE, OH 44146
Inspection type
Accident-driven (A)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327991
SIC code (legacy)
3281
Employees
10
Ownership type
A

6 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $2100.00 · Current $2100.00
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
lifting and moving granite and marble slabs weighing up to 1000 pounds by
means of pressure-
gripping lifting clamps were exposed to crushing injuries from falling or
slipping slabs while
positioned within the "fall shadow" of the load being moved:
On or about December 30, 2009, an employee who had been performing
operations related to
releasing the clamp while standing in the "fall shadow" of a granite slab
on the flatbed of a 2005
International 4300 truck was fatally injured by the impact of his head on
the concrete floor of
the warehouse and the impact of at least one chunk of the broken slab to
his face.
Among other methods, feasible and acceptable methods of abating this
condition would include
the following:
1.Development and implementation of a policy prohibiting employees being
positioned
within the path or "fall shadow" during the handling of slabs where
falling slabs can
present crushing injuries, as is recommended practice throughout the stone
and marble
industry;
2.Development and implementation of safe slab handling procedures,
instruction of
employees on those procedures, and enforcement of those procedures, as
recommended
by SHIB 08-12-2008, "Hazards of Transporting, Unloading, Storing and
Handling
Granite, Marble and Stone Slabs" and MIA Technical Module, "Safety in the
Stone
Business";
3.Consideration of the use of slings or wire rope cables rather than
clamps.
Recent events (2)
  • — F (S) $2100.00
  • — Z (S) $2100.00

5(a)(1)

Serious Gravity 10 3 instances 6 exposed
Issued
Abate by
Penalty
Initial $2100.00 · Current $2100.00
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to the hazards of being hit or crushed from falling granite
or marble slabs:
1.The red clamp had no labels giving information including but not limited
to the rated
load capacity, the manufacturer's name and address, the model number and
serial number
of the device, and safety warning data.
2.There was no documentation of frequent and periodic inspection of the
red clamp
(manufacturer unknown) and the Abaco 50 heavy duty lifter clamps.
3.Training on the clamps and on safe slab handling practices was not
adequate to prevent
incidents involving the dropping of slabs.
Among other methods, feasible and acceptable methods of abating the
conditions noted above
include:
1.Labeling the red clamp with information, in accordance with ASME
B30.20-2006,
Section 20-1.2.1.
2.Conducting frequent and periodic inspections of the clamps, in
accordance with ASME
B30.20-2006, Sections 20-1.3.3 and 20-1.3.4, and repairing or replacing
damaged or
worn parts accordingly.
3.Testing the clamps prior to use by a qualified person, in accordance
with ASME B30.20-
2006, Section 20-1.3.8.
4.Providing thorough and comprehensive training of employees involved in
any aspect of
slab handling, in accordance with the manufacturer's operation manuals and
with ASME
B30.20-2006, Section 20-1.4.2, including but not limited to safe
application of the clamp
to slabs of different sizes and thicknesses; safe work practices for
operations that are
potentially the most hazardous; inspection, cleaning, and storage
procedures; and
certification of the ability to handle lifting equipment safely by
employees who will
perform those operations.
Recent events (2)
  • — F (S) $2100.00
  • — Z (S) $2100.00

1910.135 A01

Deleted Serious Gravity 10 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $1500.00 · Current $1500.00
Recent events (2)
  • — F (S) $1500.00
  • — Z (S) $1500.00

1910.138 A

Serious Gravity 04 2 instances 6 exposed
Issued
Abate by
Penalty
Initial $750.00 · Current $750.00
Recent events (2)
  • — F (S) $750.00
  • — Z (S) $750.00

1910.179 J02 III

Serious Gravity 03 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $750.00 · Current $750.00
Recent events (2)
  • — F (S) $750.00
  • — Z (S) $750.00

1910.179 J03

Serious Gravity 03 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $750.00
Recent events (2)
  • — F (S)
  • — Z (S) $750.00

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 314066747.