OSHA Inspection: ALUMINUM FINISHING, LLC

Issued

2011-04-18 00:00:00

Abate by

2011-10-31 00:00:00

Penalty

Initial $3080.00 · Current $1479.00 Reduced

General-duty citation text

P.L. 91-596 Section 5(a)(1) of the Occupational Safety and Health Act of
1970: The employer
did not furnish employment and a place of employment which were free from
recognized hazards
that were causing or likely to cause death or serious physical harm to
employees in that
employees were exposed to the hazard(s) of burns from steam:
a.In the boiler room on top of the boiler - on or about December 14, 2010,
steam
blew out of the stop valve across the work/access platform, exposing the
maintenance manager when checking the boiler for operation to steam burn
hazards.
Among other methods, one feasible and acceptable method to correct this
hazard is to
follow the ASME   recommended guidelines for Care of Power Boilers,
Section C7.412
(i) and C7.413(a)(1).  Check condition and operation of all feed water,
blow down, drain
and other valves and replace/repack parts as necessary.
ABATEMENT CERTIFICATION IS REQUIRED.TION

Issued

2011-04-18 00:00:00

Abate by

2011-07-29 00:00:00

Penalty

Initial $5390.00 · Current $2587.00 Reduced

General-duty citation text

P.L. 91-596 Section 5(a)(1) of the Occupational Safety and Health Act of
1970: The employer
did not furnish employment and a place of employment which were free from
recognized hazards
that were causing or likely to cause death or serious physical harm to
employees in that
employees were exposed to the struck-by hazard(s):
a)Anodizing Line - on or about October 19, 2010, employees worked in and
around
the anodizing areas where they were exposed to struck-by hazards due to
corroded ceiling and wall building components such as steel beam, sheeting,
piping, etc.
Among other methods, one feasible and acceptable abatement method to
correct this
hazard would be to ensure proper design and repair the ventilation
systems.  Remove,
replace, or repair the corroded ceiling and wall building components such
as metal
sprinkler system pipes, brackets/hangers, light fixtures, wall sheeting,
and steel members
that supported the hoists.
ABATEMENT CERTIFICATION AND DOCUMENTATION ARE REQUIRED.TION

Issued

2011-04-18 00:00:00

Abate by

2011-06-01 00:00:00

Penalty

Initial $3850.00 · Current $1848.00 Reduced

Issued

2011-04-18 00:00:00

Abate by

2011-04-21 00:00:00

Issued

2011-04-18 00:00:00

Abate by

2011-05-12 00:00:00

Penalty

Initial $3080.00 · Current $1479.00 Reduced

Issued

2011-04-18 00:00:00

Abate by

2011-05-12 00:00:00

Penalty

Initial $2618.00 · Current $2618.00

Issued

2011-04-18 00:00:00

Abate by

2010-10-19 00:00:00

Issued

2011-04-18 00:00:00

Abate by

2010-10-19 00:00:00

Issued

2011-04-18 00:00:00

Abate by

2011-04-21 00:00:00

Penalty

Initial $2310.00 · Current $2000.00 Reduced

Issued

2011-04-18 00:00:00

Abate by

2011-05-12 00:00:00

Penalty

Initial $3080.00 · Current $1500.00 Reduced

Issued

2011-04-18 00:00:00

Abate by

2011-05-12 00:00:00

Penalty

Initial $5390.00 · Current $5390.00

Issued

2011-04-18 00:00:00

Abate by

2011-05-20 00:00:00

Penalty

Initial $53900.00 · Current $21949.00 Reduced

Issued

2011-04-18 00:00:00

Abate by

2011-05-12 00:00:00

Penalty

Initial $4620.00 · Current $3150.00 Reduced

Issued

2011-04-18 00:00:00

Abate by

2011-09-30 00:00:00

Penalty

Initial $7700.00 · Current $4000.00 Reduced

Issued

2011-04-18 00:00:00

Abate by

2011-04-21 00:00:00

Penalty

Initial $9240.00 · Current $4000.00 Reduced

Issued

2011-04-18 00:00:00

Abate by

2011-04-21 00:00:00

Penalty

Initial $4620.00

Issued

2011-04-18 00:00:00

Abate by

2011-04-21 00:00:00

Issued

2011-04-18 00:00:00

Abate by

2011-05-12 00:00:00

Penalty

Initial $10780.00 · Current $4000.00 Reduced

Issued

2011-04-18 00:00:00

Abate by

2011-05-12 00:00:00

Penalty

Initial $6160.00 · Current $4000.00 Reduced

Issued

2011-04-18 00:00:00

Abate by

2011-06-02 00:00:00

Issued

2011-04-18 00:00:00

Abate by

2011-04-21 00:00:00