OSHA Inspection: WAYNE INDUSTRIES, LLC

Issued

2011-06-17 00:00:00

Abate by

2011-07-12 00:00:00

Penalty

Initial $3570.00 · Current $2499.00 Reduced

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to struck-by hazards:
a)Steel building and wood shop in outlying building; behind main building;
Overhead Underhung Harrington 1/4 Ton Crane with hoist: On or about March
21, 2011, the employer exposed to employees to struck by hazards in that
they
failed to ensure periodic inspections were performed on equipment to notice
deficiencies such as the hook load limit exceeding the beam limits and
latch hook
being broken.
b)Main building, steel welding area; Overhead Underhung 1/2 Ton crane not
inspected: On or about March 21, 2011, the employer exposed to employees to
struck by hazards in that they failed to ensure that periodic inspections
were
performed on equipment.
c)Finish Assembly Area in Main building; Overhead Underhung 1 Ton Coffin
Crane with hoist: On or about March 21, 2011, the employer exposed
employees
to struck by hazards in that they failed to ensure that periodic
inspections were
performed on equipment to recognize deficiencies such as a broken safety
latch.
Among others, one feasible and acceptable method to correct the hazards is
to follow the
standards in ASME B30.16.2007, section 16-2.1.3(a), periodic inspections
shall be performed.
1

Issued

2011-06-17 00:00:00

Abate by

2011-07-12 00:00:00

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to struck by hazards:
a)Steel building and wood shop; Overhead Underhung Harrington 1/4 Ton Crane
with hoist: On or about March 21, 2011, the employer exposed employees to
struck by hazards in that they failed to ensure load markings of hoist did
not
exceed load markings on monorail.
Among others, one feasible and acceptable method to correct the hazards is
to follow the
standards in ASME B30.11.2004, section 11-1.1.2, Rated Load Markings-
Monorails.

Issued

2011-06-17 00:00:00

Abate by

2011-07-06 00:00:00

Penalty

Initial $2975.00 · Current $2082.00 Reduced

Issued

2011-06-17 00:00:00

Abate by

2011-07-06 00:00:00

Penalty

Initial $2975.00 · Current $2082.00 Reduced

Issued

2011-06-17 00:00:00

Abate by

2011-07-13 00:00:00

Penalty

Initial $2975.00 · Current $2082.00 Reduced

Issued

2011-06-17 00:00:00

Abate by

2011-06-29 00:00:00

Penalty

Initial $3570.00 · Current $2499.00 Reduced

Issued

2011-06-17 00:00:00

Abate by

2011-07-13 00:00:00

Penalty

Initial $2975.00 · Current $2082.00 Reduced

Issued

2011-06-17 00:00:00

Abate by

2011-07-06 00:00:00

Penalty

Initial $2380.00 · Current $1666.00 Reduced

Issued

2011-06-17 00:00:00

Abate by

2011-07-06 00:00:00

Penalty

Initial $3570.00 · Current $2499.00 Reduced

Issued

2011-06-17 00:00:00

Abate by

2011-07-06 00:00:00

Penalty

Initial $700.00 · Current $490.00 Reduced

Issued

2011-06-17 00:00:00

Abate by

2011-03-23 00:00:00