KENNETT, MO —
OSHA Inspection: WILSON RECYCLING
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WILSON RECYCLING in 2000 INDEPENDENCE AVENUE, KENNETT, MO 63857 (NAICS 423930). OSHA activity number 315463356.
Watch Wilson Recycling — free
Get an email when a new federal OSHA severe-injury report for Wilson Recycling is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- WILSON RECYCLING
- Site address
- 2000 INDEPENDENCE AVENUE
- City
- KENNETT
- State
- MO
- ZIP
- 63857
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423930
- SIC code (legacy)
- 5093
- Employees
- 8
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
21 citations on file for this inspection.
5(a)(1)
- Issued
- Abate by
- Penalty
- Initial $1800.00 · Current $1260.00 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the potential hazard of being struck-by suspended loads: a/ At the yard, frequent inspections of the Walker 48LM Magnet attached to the Doosan 225 LCV Tracked Material Handler Machine were not performed. One method of abatement to correct this apparent hazard is to perform thorough frequent inspections of this mechanical lifting device as required by ASME B30.20-2003, paragraph 20-4.3.2. DISCLAIMER: a/ The employer is not limited to the abatement method(s) suggested by OSHA. b/ The employer is responsible for selecting and implementing an effective abatement method. ABATEMENT CERTIFICATION AND ABATEMENT VERIFICATION ARE REQUIRED FOR THIS VIOLATION.
Recent events (2)
- — I (S) $1260.00
- — Z (S) $1800.00
5(a)(1)
- Issued
- Abate by
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the potential hazard of being struck by a suspended load: a/ At the yard, periodic inspections of the Walker 48LM Magnet attached to the Doosan 225 LCV Tracked Material Handler Machine were not performed. One method of abatement to correct this apparent hazard is to perform thorough periodic inspections of this mechanical lifting device as required by ASME B30.20-2003, paragraph 20-4.3.3. DISCLAIMER: a/ The employer is not limited to the abatement method(s) suggested by OSHA. b/ The employer is responsible for selecting and implementing an effective abatement method. ABATEMENT CERTIFICATION AND ABATEMENT VERIFICATION ARE REQUIRED FOR THIS VIOLATION.ON
5(a)(1)
- Issued
- Abate by
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the potential hazard of being struck by a suspended load: a/ At the yard, dated inspection records for the Walker 48LM Magnet attached to the Doosan 225 LCV Tracked Material Handler were not available. One method of abatement to correct this apparent hazard is to perform thorough periodic inspections of this mechanical lifting device and maintain records as required by ASME B30.20-2003, paragraph 20-4.3.5. DISCLAIMER: a/ The employer is not limited to the abatement method(s) suggested by OSHA. b/ The employer is responsible for selecting and implementing an effective abatement method. ABATEMENT CERTIFICATION AND ABATEMENT VERIFICATION ARE REQUIRED FOR THIS VIOLATION.ON
5(a)(1)
- Issued
- Abate by
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the potential hazard of being struck by a suspended load: a/ At the yard, periodic inspections of the four-point grapple attached to the Caterpillar M318 Wheeled Material Handler Machine were not performed. One method of abatement to correct this apparent hazard is to perform thorough periodic inspections of this mechanical lifting device as required by ASME B30.20-2003, paragraph 20-5-3.3. DISCLAIMER: a/ The employer is not limited to the abatement method(s) suggested by OSHA. b/ The employer is responsible for selecting and implementing an effective abatement method. ABATEMENT CERTIFICATION AND ABATEMENT VERIFICATION ARE REQUIRED FOR THIS VIOLATION.
5(a)(1)
- Issued
- Abate by
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the potential hazard of being struck by a suspended load: a/ At the yard, dated inspection records for the four-point grapple attached to the Caterpillar M318 Wheeled Material Handler were not available. One method of abatement to correct this apparent hazard is to perform thorough frequent inspections of this mechanical lifting device as required by ASME B30.20-2003, paragraph 20-5-3.5. DISCLAIMER: a/ The employer is not limited to the abatement method(s) suggested by OSHA. b/ The employer is responsible for selecting and implementing an effective abatement method. ABATEMENT CERTIFICATION AND ABATEMENT VERIFICATION ARE REQUIRED FOR THIS VIOLATION.ON
1910.22 A01
- Issued
- Abate by
- Penalty
- Initial $1800.00 · Current $1260.00 Reduced
Recent events (2)
- — I (S) $1260.00
- — Z (S) $1800.00
1910.132 D01 I
- Issued
- Abate by
- Penalty
- Initial $2400.00 · Current $1680.00 Reduced
Recent events (2)
- — I (S) $1680.00
- — Z (S) $2400.00
1910.132 D02
- Issued
- Abate by
1910.132 F04
- Issued
- Abate by
1910.133 A01
- Issued
- Abate by
1910.138 A
- Issued
- Abate by
1910.145 F05
- Issued
- Abate by
- Penalty
- Initial $3000.00 · Current $2100.00 Reduced
Recent events (2)
- — I (S) $2100.00
- — Z (S) $3000.00
1910.212 A03 II
- Issued
- Abate by
1910.147 C01
- Issued
- Abate by
- Penalty
- Initial $1800.00 · Current $1260.00 Reduced
Recent events (2)
- — I (S) $1260.00
- — Z (S) $1800.00
1910.147 C04 I
- Issued
- Abate by
1910.178 L02 II
- Issued
- Abate by
- Penalty
- Initial $1800.00 · Current $1260.00 Reduced
Recent events (2)
- — I (S) $1260.00
- — Z (S) $1800.00
1910.178 L06
- Issued
- Abate by
1910.305 B01 II
- Issued
- Abate by
- Penalty
- Initial $1800.00 · Current $1260.00 Reduced
Recent events (2)
- — I (S) $1260.00
- — Z (S) $1800.00
1910.334 A02 I
- Issued
- Abate by
1910.37 B02
- Issued
- Abate by
1910.1200 E01
- Issued
- Abate by
More inspections in this industry (NAICS 423930)
DETROIT, MI—2026-07-15
STRONG STEEL PRODUCTS, LLC
OGDEN, UT—2026-07-10
TEAR A PART AUTO RECYCLING
GARNER, NC—2026-07-09
161490 - CAROLINA METAL RECYCLERS, LLC
JOPLIN, MO—2026-07-07
SERVICE RECYCLING - NORTH PLANT
HOLBROOK, NY—2026-07-01
ARROW SCRAP CORPORATION
More inspections in MO
CLINTON, MO—2026-07-14
TORCHYLO BUILDERS, LLC.
KANSAS CITY, MO—2026-07-09
NIAGARA BOTTLING
MONETT, MO—2026-07-09
MONETT METALS INC.
PARKVILLE, MO—2026-07-08
SKY-TECH ROOFING, LLC.
SPRINGFIELD, MO—2026-07-07
D & C CONSTRUCTION, LLC.
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 315463356.