Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: WINTERSET, INC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of WINTERSET, INC in 9 CROSS RD., THORNTON, NH 03285 (NAICS 237310). OSHA activity number 330988023.

Watch Winterset, INC — free Get an email when a new federal OSHA severe-injury report for Winterset, INC is published. One employer, no account, unsubscribe in one click.
Establishment
WINTERSET, INC
Site address
9 CROSS RD.
City
THORNTON
State
NH
ZIP
03285
Mailing
P.O. BOX 968, LYNDONVILLE, VT 05851
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
237310
Employees
100
Ownership type
A

4 citations on file for this inspection.

1926.303 B01

Serious Gravity 10 2 instances 3 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $2450.00 Reduced
29 CFR 1926.303(b)(1):  Grinding machines were not equipped with safety guards in conformance with the requirements of American National Standards Institute, B7.1-1970, Safety Code for the Use, Care and Protection of Abrasive Wheels, and paragraph (d) of this section:    Jobsite:  The DeWalt 4.5-inch and 9-inch grinders, used by the employees engaged in grinding old rivets and beam seats, were not equipped with safety guards.
Recent events (2)
  • — I (S) $2450
  • — Z (S) $4900

1926.1412 F01

Other-than-serious 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $2975.00 · Current $0.00 Reduced
29 CFR 1926.1412(f)(1):  The equipment was not inspected at least every 12 months by a qualified person in accordance with paragraph (d) of this section.     Jobsite:  The Link-Belt crane, used by employees to lift bridge beams, was not inspected by a qualified person within the past twelve months.
Recent events (2)
  • — I (O) $0
  • — Z (S) $2975

1926.1417 E01

Serious Gravity 10 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $2450.00 Reduced
29 CFR 1926.1417(e)(1):  The crane operator must not leave the controls while the load was suspended except where all of the requirements of (i) through (iv) of this standard are met.    Jobsite:  The crane operator was not at the controls while the bridge span beam was suspended from the crane.
Recent events (2)
  • — I (S) $2450
  • — Z (S) $4900

1926.1425 B

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $0.00 Reduced
29 CFR 1926.1425(b):  While the operator was not moving the suspended load, no employee shall be within the fall zone, except those employees engaged in; (b)(1): hooking, unhooking or guiding a load; (b)(2) initial attachment of the load to a component or structure or (b)(3) operating a concrete hopper or bucket.    Jobsite:  The employees, engaged in changing the seat bearing surface on the abutment, were working within the fall zone, beneath the suspended load.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4900

View WINTERSET, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330988023.