OSHA Inspection: WILSON RAILING & METAL FABRICATING COMPANY

Issued

2011-12-30 00:00:00

Abate by

2012-02-14 00:00:00

Penalty

Initial $4200.00 · Current $2100.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:    (a) The employer failed to establish and utilize energy control program consisting of control procedure(s), employee training, and periodic inspections.

Issued

2011-12-30 00:00:00

Abate by

2012-04-30 00:00:00

Penalty

Initial $3000.00 · Current $2100.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    (a) Facility Wide - The band saws were not equipped with enclosure guards for the unused portion of the blade(s).     (b) Drill Press Area - The drill presses were not equipped with enclosure guards for their rotating parts.

Issued

2011-12-30 00:00:00

Abate by

2012-04-30 00:00:00

Penalty

Initial $4200.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):    (a) Press Area - The Promecam and Hurco press brakes point of operation were not guarded.

Issued

2011-12-30 00:00:00

Abate by

2012-01-24 00:00:00

Penalty

Initial $1800.00 · Current $900.00 Reduced

General-duty citation text

29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields:    (a)Facility Wide - Welding screens or shiields were not used to protect employees in clear site of the welding rays.

Issued

2011-12-30 00:00:00

Abate by

2012-01-24 00:00:00

Penalty

Initial $2400.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1904.29(b)(1): The employer did not fill out or correctly fill out an OSHA 300 Form or equivalent for each recordable injury or illness    The following work-related injuries or illnesses were not entered correctly on the OSHA Form 300 or equivalent for each recordable injury or illness,     a)  Calendar year 2011, employee (#1) incurred an injury and the classification of case required one check mark per injury. The numbers of days away, if any, were not correctly marked for employee (#2 and #3).    b)  Calendar year 2010, employee (#1) incurred an injury and the classifications of case were not checked off. Numbers of days away were not legible. Employee (#2) incurred an injury and the classification of case required one check mark.    c)  Calendar year  2009, employee ( #1,#2,#3) incurred an injury and the check "injury" column required one type of illness to be marked. Employee (#5) incurred an injury and the number of days away from work cannot reflect 1/2 day.     d) Calendar year 2008, employee (#6) incurred an injury and the injury type was not classified.     e) Calendar year 2007, employee (#1) incurred an injury and the classification of case was unclear as well as the injury type. Employee (#4) incurred an injury and the number of days away from work cannot reflect 1/2 day.     f) Calendar years 2007-2010, did not have to totals filled out on the OSHA 300 Injury and Illness Log.

Issued

2011-12-30 00:00:00

Abate by

2012-01-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1904.32(a)(2): A Summary of Work-Related Injuries and Illnesses (OSHA Form 300-A) or equivilant were not kept by the establishment.    (a) The employer did not supply a copy of the Summary of Work Related Injuries and Illnesses, OSHA Form 300-A, for the calendar years of 2007 through 2011.