Safety Incidents OSHA Severe Injury Reports · 2015–2025
3,913,242Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: CHICAGO METAL FABRICATORS

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of CHICAGO METAL FABRICATORS in 3724 S. ROCKWELL, CHICAGO, IL 60632 (NAICS 332312). OSHA activity number 331913855.

Watch Chicago Metal Fabricators — free Get an email when a new federal OSHA severe-injury report for Chicago Metal Fabricators is published. One employer, no account, unsubscribe in one click.
Site address
3724 S. ROCKWELL
City
CHICAGO
State
IL
ZIP
60632
Mailing
3724 S. ROCKWELL, CHICAGO, IL 60632
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
75
Ownership type
A

5 citations on file for this inspection.

1910.179 B05

Serious Gravity 5 2 instances 30 exposed
Issued
Abate by
Penalty
Initial $3500.00 · Current $1750.00 Reduced
29 CFR 1910.179(b)(5):     Rated load marking. The rated load of the crane shall be plainly marked on each side of the crane, and if the crane has more than one hoisting unit, each hoist shall have its rated load marked on it or its load block and this marking shall be clearly legible from the ground or floor.    Shop area - On or about February 8, 2012, the following overhead cranes did not have the rated load plainly marked on each side of the crane.    1. Northern 10 ton crane south side - center bay    2. 10 ton crane both side - west bay
Recent events (2)
  • — I (S) $1750
  • — Z (S) $3500

1910.179 J02 III

Serious Gravity 5 1 instance 30 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.179(j)(2)(iii):     Hooks with deformation or cracks. Visual inspection daily; monthly inspection with a certification record which includes the date of inspection, the signature of the person who performed the inspection and the serial number, or other identifier, of the hook inspected. For hooks with cracks or having more than 15 percent in excess of normal throat opening or more than 10 twist from the plane of the unbent hook refer to paragraph (l)(3)(iii)(a) of this section.    Production area - On or about Fedruary 8, 2012, the inspection of hooks was not performed on a monthly basis with certification records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.179 J02 IV

Serious Gravity 5 1 instance 30 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.179(j)(2)(iv):     Hoist chains, including end connections, for excessive wear, twist, distorted links interfering with proper function, or stretch beyond manufacturer's recommendations. Visual inspection daily; monthly inspection with a certification record which includes the date of inspection, the signature of the person who performed the inspection and an identifier of the chain which was inspected.    Production area - On or about February 8, 2012, inspection of the hoist chans was not performed on a monthly basis with certification records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.179 M01

Serious Gravity 5 1 instance 30 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.179(m)(1):     Running ropes. A thorough inspection of all ropes shall be made at least once a month and a certification record which includes the date of inspection, the signature of the person who performed the inspection and an identifier for the ropes which were inspected shall be kept on file where readily available to appointed personnel. Any deterioration, resulting in appreciable loss of original strength, shall be carefully observed and determination made as to whether further use of the rope would constitute a safety hazard. Some of the conditions that could result in an appreciable loss of strength are the following:    Production area - February 8, 2012, the inspection of the rope was not performed on a monthly basis with certification records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.184 I09 III

Serious Gravity 1 3 instances 30 exposed
Issued
Abate by
Penalty
Initial $2100.00 · Current $1050.00 Reduced
29 CFR 1910.184(i)(9)(iii):     Removal from service. Synthetic web slings shall be immediately removed from service if any of the following conditions are present:  Snags, punctures, tears or cuts.    Shop area - On or about February 8, 2012, several two and four inch synthetic web slings used to move material were damaged, worn and cut, and had not been removed from service. Employees were thereby exposed to hazards associated with moving and falling material.
Recent events (2)
  • — I (S) $1050
  • — Z (S) $2100

View CHICAGO METAL FABRICATORS's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331913855.