Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: ROCK ON FRAMING

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ROCK ON FRAMING in 7800 BEDFORD EULESS RD., NORTH RICHLAND HILLS, TX 76180 (NAICS 238130). OSHA activity number 333324036.

Watch Rock ON Framing — free Get an email when a new federal OSHA severe-injury report for Rock ON Framing is published. One employer, no account, unsubscribe in one click.
Establishment
ROCK ON FRAMING
Site address
7800 BEDFORD EULESS RD.
City
NORTH RICHLAND HILLS
State
TX
ZIP
76180
Mailing
2023 SIERRA DR., LEWISVILLE, TX 75077
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

5 citations on file for this inspection.

1926.100 A

Serious Gravity 1 1 instance 4 exposed
Issued
Penalty
Initial $1200.00 · Current $720.00 Reduced
29 CFR 1926.100(a):   Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets.      On or about April 4, 2012, the employer did not ensure employees performing framing activities working throughout the job site were wearing their hard hats.  Employees were exposed to struck by hazards.
Recent events (2)
  • — I (S) $720
  • — Z (S) $1200

1926.405 G02 IV

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1200.00 · Current $720.00 Reduced
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws.      On or about April 4, 2012, the employer did not ensure that the extension cord used to energize the Makita saw had a strain relief. Employees were exposed to electrical shock hazards.
Recent events (2)
  • — I (S) $720
  • — Z (S) $1200

1926.416 E01

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used.      On or abourt April 4, 2012, on the job site, the employer did not ensure that the electrical cord on the Makita saw was in good condition, exposing employees to electrical shock hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.453 B02 V

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1200.00 Reduced
29 CFR 1926.453(b)(2)(v): A body belt was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift:      On or abourt April 4, 2012, on the job site, the employer did not ensure that the employee was tied off to the boom or the basket while working from a JLG Aerial Lift. The employee was exposed to a fall hazard of approximately 16 feet to the concrete sidewalk below.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2000

1926.602 C01 VII

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1200.00 Reduced
29 CFR 1926.602(c)(1)(vii):  Unauthorized persons were allowed to ride on a powered industrial truck:      On or about April 4, 2012, at least one employee was riding the forks of a JLG 6036 forklift exposing the employee to a fall hazard.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2000

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 333324036.