OSHA Inspection: JSJ FURNITURE CORPORATION, INC.

Issued

2012-10-05 00:00:00

Abate by

2012-10-22 00:00:00

Penalty

Initial $3400.00 · Current $2040.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    (a) On or about 06/12/2012 - Metal Department (Main Floor), employees were exposed to the rotating, non-abrasive wheel of a polishing lathe.    (b) On or about 06/12/2012 - Metal Department (Side Room - Left Side), employees were exposed to the rotating, non-abrasive wheel of a polishing lathe.    (c) On or about 06/12/2012 - Metal Department (Side Room - Right Side), employees were exposed to the rotating, non-abrasive wheel of a polishing lathe.

Issued

2012-10-05 00:00:00

Abate by

2012-10-22 00:00:00

Penalty

Initial $3400.00 · Current $2040.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one-eighth inch:    (a) On or about 06/12/2012 - Continuous Improvement Shop (CIP), the work rest on a floor-mounted bench grinder was adjusted at 1/2 inch from the wheel.

Issued

2012-10-05 00:00:00

Abate by

2012-10-22 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch:    (a) On or about 06/12/2012 - Continuous Improvement Shop (CIP), the tongue guards were adjusted more than 1 inch from the wheels.

Issued

2012-10-05 00:00:00

Abate by

2012-10-22 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed:      (a) On or about 06/12/2012 - Maintenance Shop, no written certification to verify the periodic inspections had been performed.

Issued

2012-10-05 00:00:00

Abate by

2012-10-22 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:    (a)  On or about 06/12/2012 - Stage #1 Wash Tunnel Area, eyewash stations were not maintained where employees are exposed to corrosive materials such as, but not limited to, Liquid Ferro - TERJ.

Issued

2012-10-05 00:00:00

Abate by

2012-10-22 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.179(j)(2): The items listed in subparagraphs (j)(2)(i)-(vii) were not inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, and all deficiencies were not carefully examined and a determination made as to whether they constituted a safety hazard:    (a) On or about 06/12/2012 - Urethane Table Top Area, Manufacturing Line Near the Paint Areas, daily inspections on the overhead crane's hoists were not documented.