Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: JOSE BALTIERREZ CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JOSE BALTIERREZ CONSTRUCTION in 3025 & 3017 AURORA DRIVE, PLANO, TX 75093 (NAICS 238130). OSHA activity number 334737202.

Watch Jose Baltierrez Construction — free Get an email when a new federal OSHA severe-injury report for Jose Baltierrez Construction is published. One employer, no account, unsubscribe in one click.
Site address
3025 & 3017 AURORA DRIVE
City
PLANO
State
TX
ZIP
75093
Mailing
103 FANNING STREET, HUTCHINS, TX 75141
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

5 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 2 instances 3 exposed
Issued
Penalty
Initial $1600.00 · Current $480.00 Reduced
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury:        This violation most recently occurred on June 19, 2012, at the construction site located at 3017 and 3025 Aurora Drive, Plano, Texas 75093; where employees were exposed to possible eye injuries while operating Hitachi pneumatic nail guns without eye protection.
Recent events (2)
  • — I (S) $480
  • — Z (S) $1600

1926.304 D

Serious Gravity 5 2 instances 1 exposed
Issued
Penalty
Initial $2000.00 · Current $600.00 Reduced
29 CFR 1926.304(d):   All portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe:     This violation most recently occurred on June 19, 2012, at the construction site located at 3017 and 3025 Aurora Drive, Plano, Texas 75093; where employees were exposed to amputation hazards when operating a Makita 7 1/4-inch circular saw with the guard wedged back in the open position.
Recent events (2)
  • — I (S) $600
  • — Z (S) $2000

1926.451 B02

Serious Gravity 5 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $480.00 Reduced
29 CFR 1926.451(b)(2): Scaffold platforms and walkways were not at least 18 inches wide:        This violation most recently occurred on June 19, 2012, at the construction site located at 3017 and 3025 Aurora Drive, Plano, Texas 75093; where employees were exposed to fall hazards while working from scaffold platforms that were not at least 18-inches wide.
Recent events (2)
  • — I (S) $480
  • — Z (S) $1600

1926.451 G04 I

Serious Gravity 10 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $840.00 Reduced
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms.                                                                                                                                            This violation most recently occurred on June 19, 2012, at the construction site located at 3017 and 3025 Aurora Drive, Plano, Texas 75093; where employees were exposed to fall hazards while working from scaffolds without the use of a guardrail system or personal fall arrest system.
Recent events (2)
  • — I (S) $840
  • — Z (S) $2800

1926.1053 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $1600.00 · Current $480.00 Reduced
29 CFR 1926.1053(b)(1):  Where (a) portable ladder(s) was/were used for access to an upper level landing surface and the ladders length did not allow the ladder side rails to extend at least 3 feet (0.9) above the upper landing surface being accessed.	  This violation most recently occurred on June 19, 2012, at the construction site located at 3017 Aurora Drive, Plano, Texas 75093; where employees were exposed to fall hazards while using an extension ladder that did not extend at least three feet above the landing.
Recent events (2)
  • — I (S) $480
  • — Z (S) $1600

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334737202.