Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JET MIDWEST

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of JET MIDWEST in 9200 NW 112TH STREET, KANSAS CITY, MO 64153 (NAICS 493190). OSHA activity number 334871381.

Watch JET Midwest — free Get an email when a new federal OSHA severe-injury report for JET Midwest is published. One employer, no account, unsubscribe in one click.
Establishment
JET MIDWEST
Site address
9200 NW 112TH STREET
City
KANSAS CITY
State
MO
ZIP
64153
Mailing
9200 NW 112TH STREET, KANSAS CITY, MO 64153
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
493190
Employees
19
Ownership type
A

5 citations on file for this inspection.

1910.176 B

Serious Gravity 5 1 instance 13 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1000.00 Reduced
29 CFR 1910.176(b):     Material stored in tiers was not stacked, blocked, interlocked or limited in height so that it was stable and secure against sliding and collapse:    (a) Warehouse; Parts stored on racks posed a hazard in that the racks could slide or collapse. Racks were not secure against movement, sliding and tipping/collapsing.    Abatement certification is required for this item  use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1910.178 L01 II

Deleted Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $0.00 Reduced
29 CFR 1910.178(l)(1)(i):     The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    (a) Warehouse area; The employer did not ensure that each fork lift operator was competent and trained as required under 1910.178(l) prior to assignment as a forklift operator.    Abatement certification is required for this item  use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2000

1910.178 M03

Deleted Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $0.00 Reduced
29 CFR 1910.178(m)(3):     A safe place to ride was not provided where riding a powered industrial truck(s) was authorized:    (a) Warehouse; Employees ride on pallets lifted by forklift forks to access parts on racks when the parts are heavy or located very high. Pallets are not approved personell lifts.    Abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

1910.178 Q07

Deleted Serious Gravity 5 1 instance 13 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $0.00 Reduced
29 CFR 1910.178(q)(7):     Industrial trucks were not examined before being placed in service:    (a) Warehouse; Forklift trucks were not examined or inspected at least daily for defects that adversely affect the safety of the vehecle.    Abatement certification is required for this item  use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.
Recent events (2)
  • — I (S) $0
  • — Z (S) $1600

1910.305 G01 I

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $0.00 Reduced
29 CFR 1910.305(g)(1)(i):     Flexible cords and cables were not approved for conditions of use and location:    (a) Inspection Area; Extension cords were used in lieu of fixed wiring in a permanent location. Extension cords were affixed to conduit and could become damaged, tranfering live electricity to the conduit. The extension cords were used to relay power to power strips used at the inspection area computer work desks.     Abatement certification is required for this item  use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2000

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334871381.