Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: CHIEF EQUIPMENT INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CHIEF EQUIPMENT INC. in 400 WEST OLD COUNTRY RD., HICKSVILLE, NY 11520 (NAICS 236220). OSHA activity number 335333993.

Watch Chief Equipment INC. — free Get an email when a new federal OSHA severe-injury report for Chief Equipment INC. is published. One employer, no account, unsubscribe in one click.
Site address
400 WEST OLD COUNTRY RD.
City
HICKSVILLE
State
NY
ZIP
11520
Mailing
400 W OLD COUNTRY RD., HICKSVILLE, NY 11520
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
10
Ownership type
A

2 citations on file for this inspection.

1926.501 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $2800.00
29 CFR 1926.501(b)(1):  Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.      a)  Worksite, Exterior - Employees were installing plywood on the roof of a single story commercial building while working on the edge approximately 20ft above the ground.  Employees were not provided with a means of fall protection; on or about 7/21/12.      Note:  In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $2800

1926.503 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $1600.00
29 CFR 1926.503(a)(1):   The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:      a)  Worksite, Exterior - Employees were installing plywood on the edge of a flat roof, approximately 20ft above the ground below.  The employees were not trained to recognize the hazards associated with falling; on or about 07/21/12.        Note:  The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $1600

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335333993.