Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: MG FORGE CONSTRUCTION, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of MG FORGE CONSTRUCTION, LLC in GEORGETOWN RD. & NEW JERSEY TURNPIKE, BORDENTOWN, NJ 08505 (NAICS 237310). OSHA activity number 335496584.

Watch MG Forge Construction, LLC — free Get an email when a new federal OSHA severe-injury report for MG Forge Construction, LLC is published. One employer, no account, unsubscribe in one click.
Site address
GEORGETOWN RD. & NEW JERSEY TURNPIKE
City
BORDENTOWN
State
NJ
ZIP
08505
Mailing
125 POMPTON PLAINS CROSSROADS, WAYNE, NJ 07474
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
237310
Employees
12
Ownership type
A

5 citations on file for this inspection.

1926.20 B02

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $2000.00
29 CFR 1926.20(b)(2):     Programs did not provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers:    a)  Georgetown Road @ NJTP:  The employer did not provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons. As such, employees were exposed to electrical shock hazards while operating a Junttan PM25HLC Pile Driver Crane.  Additionally, employees were exposed to potential struck by hazards due to the use of wire rope lifting slings that were not permanently marked with the working load limit.   Observed on or about 07/30/2012.      NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $2000

1926.251 A02 I

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $2000.00
29 CFR 1926.251(a)(2)(i):     The employer failed to ensure rigging equipment had permanently affixed and legible identification markings as prescribed by the manufacturer that indicate the recommended safe working load.    a)  Georgetown Road @ NJTP:  The employer did not ensure that rigging equipment used in conjunction with a pile driving operation had permanently affixed and legible identification markings indicating the recommended safe working load.  Observed on or about 07/30/2012.      NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $2000

1926.251 A02 III

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.251(a)(2)(iii):     The employer failed to ensure that rigging without affixed, legible identification markings, required by paragraph (a)(2)(i) of this section was not used.     a)  Georgetown Road @ NJTP:  The employer did not ensure that rigging equipment that did not have permanently affixed and legible identification markings indicating the recommended safe working load was not used.  Observed on or about 07/30/2012.      NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $0

1926.1408 A02

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $2800.00
29 CFR 1926.1408(a)(2):     The employer did not determine if any part of the equipment, load line or load (including rigging and lifting accessories), if operated up to the equipment's maximum working radius in the work zone, could get closer than 20 feet to a power line.    a)  Georgetown Road @ NJTP:  Employees were exposed to electrical shock hazards when contact was made with overhead 13 kv power transmission lines while operating a Junttan PM25HLC Pile Driver Crane to lift and reposition 55 tubular steel piles.  The employer did not ensure that a minimum safe working distance of 20 feet was maintained, resulting in part of the equipment or the load line contacting the energized wire.  Observed on or about 07/30/2012.        NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $2800

1926.1428 A03

Other-than-serious 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1428(a)(3):     The employer did not make the signal person training documentation available at the site while the signal person is employed by the employer.      a)  Georgetown Road @ NJTP:  The employer did not make documentation of an employee's signal person training available at the jobsite.  Observed on or about 07/30/2012.      NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335496584.