Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: JJ US GENERAL CONSTRUCTION, INC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JJ US GENERAL CONSTRUCTION, INC in 5430 COPPER SPRINGS LN., CUMMING, GA 30040 (NAICS 238130). OSHA activity number 335933784.

Watch JJ US General Construction, INC — free Get an email when a new federal OSHA severe-injury report for JJ US General Construction, INC is published. One employer, no account, unsubscribe in one click.
Site address
5430 COPPER SPRINGS LN.
City
CUMMING
State
GA
ZIP
30040
Mailing
985 SWEETWATER CIRCLE, LAWRENCEVILLE, GA 30044
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
7
Ownership type
A

5 citations on file for this inspection.

1926.501 B13

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1400.00 Reduced
29 CFR 1926.501(b)(13):     Employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph (b)      On or about August 21, 2012:    Employees were exposed to fall hazards of approximately 21 feet while engaged in residential construction on the second floor, laying out for the erection of exterior walls.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

1926.503 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2400.00 · Current $1200.00 Reduced
29 CFR 1926.503(a)(1):     The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    On or about August 21, 2012:    Employer failed to implement and maintain a fall protection training program for employees that were exposed to fall hazards of approximately 21 feet while prepping second floor area for exterior walls.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2400

1926.1060 A

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1060(a):     The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards.    On or about August 21, 2012:    Employer failed to provide a training program to employees to help to eliminate or utilize the hazards associated with using ladders on the job site, to include the proper use and set up of step ladders.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1053 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $800.00 Reduced
29 CFR 1926.1053(b)(1):     Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:    On or about August 21, 2012:    Employees were exposed to fall hazards of approximately 11 feet while utilizing a step ladder to gain access to the second floor working area in where the rails of the ladder did not extend at least three feet above upper landing surface.
Recent events (2)
  • — I (S) $800
  • — Z (S) $1600

1926.1053 B04

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1053(b)(4):     Ladder(s) were used for purposes other than the purpose for which they were designed:    On or about August 21, 2012;    Employees were exposed to fall hazards of appoximately 8 feet while utilizing a step ladder to access an upper working surface, in which the step ladder was not being used as intended. The step ladder was being used as being leaned against a wall and not extened into to an A frame shape.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335933784.