OSHA Inspection: O'LEARY ENTERPRISES, INC.

Issued

2012-09-28 00:00:00

Abate by

2012-10-15 00:00:00

Penalty

Initial $2100.00 · Current $2100.00

General-duty citation text

29 CFR 1910.219(d)(1):     Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):    a) at the workplace, near the balers - the 3.5" and 10" inch wide pulleys, which were part of the belt and pulley system of the floor fan, were unguarded, the motor operated at 1740 rpm, observed on or about 9/11/12.

Issued

2012-09-28 00:00:00

Abate by

2012-10-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(e)(3)(i):     Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified in 29 CFR 1910.219(m) and (o):    a) at the workplace, near the balers - the 1/2-inch wide belt of the floor fan was not guarded, the motor operated at a speed of 1740 rpm, observed on or about 9/11/12.

Issued

2012-09-28 00:00:00

Abate by

2012-10-18 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.134(c)(1):     The employer did not establish and implement a written respiratory protection program with worksite-specific procedures to include the provisions of (i)-(ix), as applicable, where respirators were required by the employer:    a) at the wokplace - there was not a written respiratory protection program where respirators were required by the employer during torch cutting, observed on or about 9/11/12.

Issued

2012-09-28 00:00:00

Abate by

2012-10-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(4)(iii):     An evaluation of each powered industrial truck operator's performance was not conducted at least once every 3 years:    a) at the workplace - a forklift operator was most recently certified on the forklift in 2008, observed on or about 9/11/12.