TAMPA, FL —
OSHA Inspection: ALVIN WALTERS CONSTRUCTION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ALVIN WALTERS CONSTRUCTION, INC. in 3302 GUNN HWY, TAMPA, FL 33626 (NAICS 238140). OSHA activity number 337030183.
Where did this inspection happen?
- Establishment
- ALVIN WALTERS CONSTRUCTION, INC.
- Site address
- 3302 GUNN HWY
- City
- TAMPA
- State
- FL
- ZIP
- 33626
- Mailing
- 9406 HARTTS DR, TAMPA, FL 33612
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 5
- Ownership type
- A
Citations
9 citations on file for this inspection.
1926.451 C02 II
- Issued
- Penalty
- Initial $1200.00 · Current $600.00 Reduced
General-duty citation text
29 CFR 1926.451(c)(2)(ii): Unstable objects were used to support scaffolds or platform units: a. At the north-east corner of the building, a tubular welded frame scaffold three frames high was used to reach elevations at the exterior of the building during cement block wall construction with a scaffold leg at the corner of the building supported on loose pieces of wood.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
1926.451 G01
- Issued
- Penalty
- Initial $1600.00 · Current $700.00 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level. a. At the north side of the building, a tubular welded frame scaffold three frames high had 4 sections on the top frame where employees were working without guardrails and no other type of fall protection was provided, exposing employees to a 20 foot fall hazard.
Recent events (2)
- — I (S) $700
- — Z (S) $1600
1926.452 C02
- Issued
- Penalty
- Initial $1600.00 · Current $700.00 Reduced
General-duty citation text
29 CFR 1926.452(c)(2): Tubular welded frames and panels were not braced by cross, horizontal, or diagonal braces, or combination thereof, which would have secured vertical members together laterally: a. At the perimeter of the building, a tubular welded frame scaffold three frames high was erected around the entire building to reach heights during cement block wall construction without having cross braces installed at the wall side on the second and third frames. The entire scaffold had braces on both sides only on the first frame.
Recent events (2)
- — I (S) $700
- — Z (S) $1600
1910.1200 E01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (Construction Reference: 1926.59) a. On site, employees were exposed to masonry cement containing silicates during cement block wall construction. A written hazard communication program was not developed, maintained and implemented at the workplace.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 G01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(g)(1): The employer did not have a material safety data sheet for each hazardous chemical which they used: (Construction Reference: 1926.59) a. On site, employees were exposed to masonry cement containing silicates during cement block wall construction. Material Safety Data Sheets were not maintained at the workplace to provide employees information on the hazardous chemicals used.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(h): Employees were not provided information and training as specified in 29 CFR 1910.1200(h)(1) and (2) on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard was introduced into their work area: (Construction Reference: 1926.59) a. On site, employees were exposed to masonry cement containing silicates during cement block wall construction. The employees were not provided training and education on the hazardous chemicals at the workplace.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1926.20 B01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.20(b)(1): A safety and health program was not initiated and/or maintained to provide compliance with the general safety and health provisions of the standard: a. The employer did not develop and implement a written safety and health program to address the company policy on safety as well as the employer/employee responsibilities.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1926.405 A02 II I
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.405(a)(2)(ii)(I): Flexible cords and cables used for temporary wiring were not protected from damage: a. At the yard area, a red extension cord used to provide power to a drill hammer was subject to being run over by the forklift. The cord was run in the yard area without protection.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1926.454 A
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards as required by paragraph (a)(1)-(5) of this section: a. At the site, employees were in progress of cement block installation and were using a tubular welded frame scaffold with missing guardrails, missing cross braces and compromised footing. Employees involved in scaffold use were not provided training and education in the following: 1. The nature of fall hazards and any falling object hazards. 2. The correct procedures for dealing with erecting, maintaining, and disassembling the fall protection system and falling object protection system being used. 3. The proper use of the scaffold, and the proper handling of material on the scaffold. 4. The maximum intended load and load carrying capacities of the scaffold. 5. Any other pertinent requirements of Subpart "L" (Scaffolds) under 29 CFR 1926.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 238140)
RENO, NV—2026-07-16
DC MASONRY
WINNETKA, IL—2026-07-15
CHICAGO STUCCO CO.
LODI, NJ—2026-07-15
J & O MASONRY CONTRACTORS
DORAVILLE, GA—2026-07-14
SUDLOW CONCRETE, INC.
FLAGLER BEACH, FL—2026-07-14
PLANET DESIGN SERVICES, INC.
More inspections in FL
MARIANNA, FL—2026-07-16
BRANNON BROTHERS CONSTRUCTION, LLC
LAKELAND, FL—2026-07-16
SOUTHERN MILLING & LUMBER, INC.
OAKLAND PARK, FL—2026-07-16
PKB CABINETRY
LAKELAND, FL—2026-07-16
ELIJAH WHOLESALE, LLC.
TAMPA, FL—2026-07-16
VALENCIA WHOLESALE, INC.
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337030183.