Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: E.E.P. QUALITY GROUP, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of E.E.P. QUALITY GROUP, INC. in 30 VANTAGE POINT DR. SUITE 4, ROCHESTER, NY 14624 (NAICS 611430). OSHA activity number 337066021.

Watch E.E.P. Quality Group, INC. — free Get an email when a new federal OSHA severe-injury report for E.E.P. Quality Group, INC. is published. One employer, no account, unsubscribe in one click.
Site address
30 VANTAGE POINT DR. SUITE 4
City
ROCHESTER
State
NY
ZIP
14624
Mailing
30 VANTAGE POINT DR. SUITE 4, ROCHESTER, NY 14624
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
611430
Employees
25
Ownership type
A

5 citations on file for this inspection.

1910.215 A04

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $0.00 Reduced
29 CFR 1910.215(a)(4):     Grinding machinery was not used with work rest(s) to support offhand grinding work:    a) Facility - On or about 10/25/12, abrasive wheel for Central Machinery 8" bench grinder (S/N #090604752), left wheel did not have a work rests.    ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $1600

1910.215 B01

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.215(b)(1):  Cup wheel(s) of grinder(s) were not protected by guards:    a) Facility - On or about 10/25/12, abrasive wheel for Central Machinery 8" bench grinder (S/N #090604752), left wheel did not have a guards.    ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.215 B09

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.215(b)(9):     Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel:    a) Facility - On or about 10/25/12, abrasive wheel for Central Machinery 8" bench grinder (S/N #090604752), left wheel did not have an adjustable tongue.    ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 E01

Other-than-serious 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(e)(1):     The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:    a)  Buffalo, NY - On or about 10/01/12, the employer did not develop, implement, and/or maintain at the workplace a written hazard communication program.  Employees in the facility use chemicals such as but not limited to LPS 2 (Aerosol) which contained Distillates (Petroleum), Hydrotreated light, Mineral seal oil and Carbon Dioxide.  A written program should include descriptions of how the criteria for:         1.   Labeling and other forms of warning;       2.   Material Safety Data Sheets AND       3.   Employee information and training will be met.    Additionally, a list of hazardous chemicals known to be present in the workplace must be compiled.  Methods used to inform employees of the hazards associated with non routine tasks and the informing of contractors of workplace hazard must also be addressed.  The written program must be made available upon request.    ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
1910.1200 (h)(1): Employees were not provided information and training as specified in 29 CFR 1910.1200(h)(2) and (3) on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard was introduced into their work area:    a)  Facility, NY - On or about 10/25/12, employees in the facility use chemicals such as but not limited to LPS 2 (Aerosol) which contained Distillates (Petroleum), Hydrotreated light, Mineral seal oil and Carbon Dioxide, employees shall be informed of:          1.   The requirements of this section:       2.   Any operations where hazardous chemicals are present; AND       3.   The location and availability of the written Hazard Communication Program, list(s) of hazardous chemicals and Material Safety Data Sheets.       Employee training shall include at least:       1.   Methods and observations that may be used to detect the presence or release of a hazardous chemical in the work area.       2.   The physical and health hazards of the chemicals in the work area.       3.   The measures employees can take to protect themselves such as specific procedures, appropriate work practices, emergency procedures and personal protective equipment to be used.       4.   The details of the employers Hazard Communication Program including an explanation of labeling systems, Material Safety Data Sheets and how employees can obtain and use the appropriate hazard information.    ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

ABBP LLC

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337066021.