Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: ALOHA TOOL & RENTAL, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ALOHA TOOL & RENTAL, INC. in 358 HOOKELA PLACE, HONOLULU, HI 96819 (NAICS 562920). OSHA activity number 337090583.

Watch Aloha Tool & Rental, INC. — free Get an email when a new federal OSHA severe-injury report for Aloha Tool & Rental, INC. is published. One employer, no account, unsubscribe in one click.
Site address
358 HOOKELA PLACE
City
HONOLULU
State
HI
ZIP
96819
Mailing
358 HOOKELA PLACE, HONOLULU, HI 96819
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
562920
Employees
28
Ownership type
A

5 citations on file for this inspection.

1910.147 C01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $3500.00 · Current $3500.00
29 CFR 1910.147(c)(1):     The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:    At the Facility - The employer had not developed an energy control program at their location for equipment such as the baler and the conveyor.
Recent events (3)
  • — C (S) $3500
  • — W (S) $3500
  • — Z (S) $3500

1910.147 C04 I

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.147(c)(4)(i):     Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    At the Facility - The employer had not documented, developed and utilized machine specific lockout/tag-out procedures.
Recent events (3)
  • — C (S) $0
  • — W (S) $0
  • — Z (S) $0

1910.212 A01

Serious Gravity 5 1 instance 18 exposed
Issued
Abate by
Penalty
Initial $3500.00 · Current $3500.00
29 CFR 1910.212(a)(1):     One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and  sparks:    At the Faciliity - There was no means of shutting off the baler's feed conveyor by someone stuck or caught in it, thus exposing them to crushing hazards found in the baler.
Recent events (3)
  • — C (S) $3500
  • — W (S) $3500
  • — Z (S) $3500

1910.157 E01

Other-than-serious 10 instances 18 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.157(e)(1):     The employer was not responsible for the inspection, maintenance and testing of all portable fire extinguishers in the workplace:    At the Faciliity - The employer had not insured that portable fire extinguishers were inspected on a monthly and a yearly basis.
Recent events (3)
  • — C (O) $0
  • — W (O) $0
  • — Z (O) $0

1910.178 L04 III

Other-than-serious 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.178(l)(4)(iii):     An evaluation of each powered industrial truck operators performance was not conducted at least once every 3 years:    At the Facility - The employer had not conducted an evaluation of each powered industrial truck operator's performance at least every three years.
Recent events (3)
  • — C (O) $0
  • — W (O) $0
  • — Z (O) $0

View ALOHA TOOL & RENTAL, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337090583.