OSHA Inspection: PAYNE ENGINEERING AND FABRICATION COMPANY INCORPORATED

Issued

2013-02-04 00:00:00

Abate by

2013-03-22 00:00:00

Penalty

Initial $1200.00 · Current $1200.00

General-duty citation text

29 CFR 1910.178(l)(4)(iii):     An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:    29 CFR 1910.178(l)(4)(iii):     Worksite:             All operators of powered industrial trucks were not trained within three years.

Issued

2013-02-04 00:00:00

Abate by

2013-03-22 00:00:00

Penalty

Initial $1600.00 · Current $1600.00

General-duty citation text

29 CFR 1910.212(a)(1):     One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    Machine Shop:    1)        The chuck of the Mackenzie Lathe was not guarded.    2)         The chuck of the Hendey Lathe was not guarded.    Shipping Area:           The unused sections of the blade of the VF Wells Metal Cutting Bandsaw were not guarded.

Issued

2013-02-04 00:00:00

Abate by

2013-03-22 00:00:00

Penalty

Initial $2000.00 · Current $2000.00

General-duty citation text

29 CFR 1910.219(d)(1):     Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):    Machine Shop:                 The pulley and belt drive of the Bullard Vertical Turret Lathe was not completely enclosed by a guard.