SCARBOROUGH, ME —
OSHA Inspection: KDA DEVELOPMENT CORPORATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of KDA DEVELOPMENT CORPORATION in EASTERN VILLAGE RESIDENTIAL COMMUNITY END OF BALLENTINE DRIVE, SCARBOROUGH, ME 04070 (NAICS 236115). OSHA activity number 337309017.
Where did this inspection happen?
- Establishment
- KDA DEVELOPMENT CORPORATION
- Site address
- EASTERN VILLAGE RESIDENTIAL COMMUNITY END OF BALLENTINE DRIVE
- City
- SCARBOROUGH
- State
- ME
- ZIP
- 04070
- Mailing
- P.O. BOX 6799, SCARBOROUGH, ME 04070
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236115
- Employees
- 3
- Ownership type
- A
Citations
6 citations on file for this inspection.
1903.19 C01
- Issued
- Abate by
- Penalty
- Initial $400.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section. At the jobsite - The employer did not furnish the abatement required for citations issued within 10 calendar days, nor did they respond to the progress report letter sent 01/22/2013 or the phone call on 02/19/2013.
Recent events (2)
- — I (O) $0
- — Z (O) $400
1926.304 F
- Issued
- Abate by
- Penalty
- Initial $2000.00 · Current $1000.00 Reduced
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(a) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws were not guarded by an automatically adjusting hood which completely enclosed that protion of the saw above the table and that protion of the saw above the material being cut: Lot 85, First floor - The controlling employer did not ensure that the Hitachi C10RB table saw used for ripping operations was provided with a guard covering the blade.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1926.304 F
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws were not equipped with a spreader to prevent material from squeezing the saw blade: Lot 85, First floor - The controlling employer did not ensure that the Hitachi C10RB table saw used for ripping operations was provided with a spreader to prevent the material being cut from squeezing the saw blade.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.304 F
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws did not have anti-kickback fingers or dogs to prevent the material from being thrown towards the operator: Lot 85, First floor - The controlling employer did not ensure that the Hitachi C10RB table saw used for ripping operations was provided with anti-kickback fringers to prevent the material from being thrown towards the operator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.404 B01 I
- Issued
- Abate by
- Penalty
- Initial $2000.00 · Current $1000.00 Reduced
General-duty citation text
29 CFR 1926.404(b)(1)(i): Employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section, or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites: The controlling employer did not ensure that ground fault circuit interrupters or an assured equipment grounding conductor program was used in the following instances: a) Lot 85, Second Floor - The painters plugged extension cords into a permanent wall receptacle to power portable 120 volt equipment. b) Lot 86, First Floor - The carpenter plugged an extension cord into a permanent wall receptacle to power a 120 volt DeWalt cut-off saw.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1926.1052 C01 I
- Issued
- Abate by
- Penalty
- Initial $1200.00 · Current $600.00 Reduced
General-duty citation text
29 CFR 1926.1052(c)(1)(i): Stairways having four or more risers or rising more than 30 inches, whichever is less, were not equipped with one stairrail system along each unprotected side or edge: Lot 85, Front Entrance - The wooden stairway had five risers and was not equipped with one stairrail system along each unprotected side.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
More inspections in this industry (NAICS 236115)
CARSON CITY, NV—2026-07-16
LT BUILDERS
FAIRVIEW, TN—2026-07-16
DRB GROUP TENNESSEE, LLC
DOVER, NH—2026-07-15
KNOX MARSH DEVELOPMENT LLC
VIENNA, VA—2026-07-15
OMARI CONSTRUCTION LLC
NORFOLK, VA—2026-07-15
SUPERIOR PRIDE INC
More inspections in ME
AUGUSTA, ME—2026-07-14
JJ GONZALEZ ROOFING AND GUTTERS
DOVER FOXCROFT, ME—2026-07-14
REDI-ROCK OF CENTRAL MAINE
PORTLAND, ME—2026-07-06
NEW ENGLAND REHABILITATION HOSPITAL OF PORTLAND
DOVER FOXCROFT, ME—2026-07-06
SHAW'S SUPERMARKETS
GORHAM, ME—2026-07-02
TOWN OF GORHAM
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337309017.