OSHKOSH, WI —
OSHA Inspection: PERFECSEAL
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PERFECSEAL in 3500 N MAIN ST, OSHKOSH, WI 54903 (NAICS 326112). OSHA activity number 337462220.
Where did this inspection happen?
- Establishment
- PERFECSEAL
- Site address
- 3500 N MAIN ST
- City
- OSHKOSH
- State
- WI
- ZIP
- 54903
- Mailing
- PO BOX 2968, OSHKOSH, WI 54901
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326112
- Employees
- 118
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Abate by
- Penalty
- Initial $3400.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by the ingoing nip point: a) The ingoing nip point created by the powered rollers above the extruder section of Mini-Extruder #803, located in the Pouch Room, was accessible to the operator during setup and while adjusting the height of the powered rollers. Abatement Documentation and Abatement Certification required.
Recent events (2)
- — I (S) $0
- — Z (S) $3400
1910.219 D01
- Issued
- Abate by
- Penalty
- Initial $4250.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) The plexiglass guard over the belt and pulley near the unload station of the Mini-Extruder #803, located in the Pouch Room, was broken and allowed access to the ingoing nip point. b) The main drive pulley and drive belt of the Slitter #6009, located in the Rewind Department, was accessible from the loading area of the slitter. Abatement Documentation and Abatement Certification required.
Recent events (2)
- — I (S) $0
- — Z (S) $4250
1910.219 E03 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $4250.00
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): b) The main drive pulley and drive belt of the slitter #6009, located in the Rewind Department, was accessible from the loading area of the slitter. Abatement Documentation and Abatement Certification required.
Recent events (2)
- — I (O) $4250
- — Z (S) $0
1910.219 F03
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed: a) The ingoing nip point of the chain and sprocket powering a roller was accessible from the unload station of the Mini-Extruder 3803, located in the Pouch Room. Abatement Documentation and Abatement Certification required.
Recent events (2)
- — I (O) $0
- — Z (S) $0
More inspections in this industry (NAICS 326112)
SUWANEE, GA—2026-06-25
ROSSINI NORTH AMERICA, LLC
ORANGEBURG, SC—2026-06-17
77529 - INDEVCO INC OF NORTH AMERICA
CONOVER, NC—2026-05-13
161214 - PREGIS PROTECTIVE FILMS - COATINGS, INC.
BIOLA, CA—2026-05-07
POLYCELL PACKAGING CORPORATION
RHINELANDER, WI—2026-05-06
PRINTPACK INC.
More inspections in WI
MUSCODA, WI—2026-07-10
SCOT INDUSTRIES, INC
FRANKLIN, WI—2026-07-10
EDGE BROADBAND SOLUTIONS LLC
APPLETON, WI—2026-07-10
LAWRENCE UNIVERSITY OF WISCONSIN
KIMBERLY, WI—2026-07-10
ENRIQUE RESENDIC
SLINGER, WI—2026-07-10
DYLAN MATTHEW SHELLEY LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337462220.