OSHA Inspection: PERFECSEAL - NEW LONDON

Issued

2013-02-08 00:00:00

Abate by

2013-03-18 00:00:00

Penalty

Initial $4250.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.23(c)(1):  Open sided floor(s) or platform(s) 4 feet or more above the adjacent floor or ground level were not guarded by standard railings (or the equivalent as specified in 29 CFR 1910.23(3)(3)(i) through (v)), on all open sides:    a)    Employee threading foil from 12" x 12" beam approximately 65" off the floor on unwind #2 without fall protection.    ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED

Issued

2013-02-08 00:00:00

Abate by

2013-03-14 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.132(d)(1)(i):     The employer did not select and have each affected employee use the types of personal protective equipment that would protect the affected employee(s) from the hazards identified in the hazard assessment:    a)    Employee threading foil from 12" x 12" beam approximately 65" off the floor on unwind #2 without fall protection.    ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED

Issued

2013-02-08 00:00:00

Abate by

2013-03-18 00:00:00

Penalty

Initial $2550.00 · Current $1275.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    a)    Jet horizontal metal bandsaw in maintenance shop did not have the unused portion of the blade guarded.    ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED

Issued

2013-02-08 00:00:00

Abate by

2013-03-18 00:00:00

Penalty

Initial $3400.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:    a)    Flexible cord was being used to supply power to a Jet horizontal metal saw in the Maintenance Shop.    ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED

Issued

2013-02-08 00:00:00

Abate by

2013-02-14 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.303(b)(1)(ii): Electrical equipment was not free from recognized hazards, based on the mechanical strength and durability, including, for parts designed to enclose and protect other equipment, the adequacy of the protection thus provided:    a)    Extension cord supplying power to camera system had a molded plug with the wiring pulled loose.    ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED