Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: DIGICO IMAGING

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of DIGICO IMAGING in 3487 EAST FULTON, COLUMBUS, OH 43227 (NAICS 339950). OSHA activity number 337695613.

Watch Digico Imaging — free Get an email when a new federal OSHA severe-injury report for Digico Imaging is published. One employer, no account, unsubscribe in one click.
Establishment
DIGICO IMAGING
Site address
3487 EAST FULTON
City
COLUMBUS
State
OH
ZIP
43227
Mailing
3487 EAST FULTON, COLUMBUS, OH 43227
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
339950
Employees
50
Ownership type
A

4 citations on file for this inspection.

1910.37 B04

Serious Gravity 5 1 instance 12 exposed
Issued
Abate by
Penalty
Initial $4500.00 · Current $2025.00 Reduced
29 CFR 1910.37(b)(4):     If the direction of travel to the exit or exit discharge is not immediately apparent, signs must be posted along the exit access indicating the direction of travel to the nearest exit and exit discharge. Additionally, the line-of-sight to an exit sign must clearly be visible at all times.    a. At the Digico Imaging facility located in Columbus, Ohio the employer had a doorway on the South side of the finishing room that led to a hallway that was not identified as an exit access.
Recent events (2)
  • — I (S) $2025
  • — Z (S) $4500

1910.178 L06

Serious Gravity 5 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $4500.00 · Current $2025.00 Reduced
29 CFR 1910.178(l)(6):     Certification. The employer shall certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation.    a. At the Digico Imaging facility located in Columbus, Ohio the employer did not ensure that all employees received formal training and evaluation before being allowed to operate a forklift.
Recent events (2)
  • — I (S) $2025
  • — Z (S) $4500

1910.303 B02

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4500.00 · Current $2025.00 Reduced
29 CFR 1910.303(b)(2):     Installation and use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling.    a. At the Digico Imaging facility located in Columbus, Ohio the employer had wired a pendant electrical outlet that was installed with a 4 inch receptacle box that was manufactured with the knock outs.  The 4 inch box was not listed and labeled to be used as a pendant receptacle.
Recent events (2)
  • — I (S) $2025
  • — Z (S) $4500

1910.132 D02

Other-than-serious 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.132(d)(2):     The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.    a. At the Digico Imaging facility located in Columbus, Ohio the employer had employees that were required to wear PPE such as safety glasses, but the employer had not performed the written certification of what PPE was required to control which hazards.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337695613.