HOUSTON, TX —
OSHA Inspection: JBC PLUMBING INC
Federal Agency inspection · Health discipline
At a glance
On , OSHA opened a federal Agency health inspection of JBC PLUMBING INC in 14134 VICKERY DR., HOUSTON, TX 77032 (NAICS 238220). OSHA activity number 337703458.
Where did this inspection happen?
- Establishment
- JBC PLUMBING INC
- Site address
- 14134 VICKERY DR.
- City
- HOUSTON
- State
- TX
- ZIP
- 77032
- Mailing
- 9137 SPRING BRANCH DR SUITE 302, HOUSTON, TX 77080
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238220
- Employees
- 8
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.651 J02
- Issued
- Abate by
- Penalty
- Initial $2800.00 · Current $1960.00 Reduced
General-duty citation text
29 CFR 1926.651(j)(2): Protection was not provided by placing and keeping excavated or other materials or equipment at least 2 feet (.61m) from the edge of excavations, or by the use of retaining devices that were sufficient to prevent materials or equipment from falling or rolling into excavations, or by a combination of both if necessary. The employer does not ensure that excavated materials are kept at least 2 feet from the edge of the excavation. a) This violation occurred on or about December 5, 2012, on the west side of the trench where employees were exposed to struck-by hazards when grading the depth of the trench without moving the spoil pile more than 2 feet from the edge. b) This violation occurred on or about December 5, 2012, on the south side of the trench where employees were exposed to struck-by hazards when grading the depth of the trench without moving the spoil pile more than 2 feet from the edge. Pursuant to 29 C.F. R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that excavated materials are kept at least 2 feet from the edge of the excavation.
Recent events (2)
- — I (S) $1960
- — Z (S) $2800
1926.652 A01
- Issued
- Abate by
- Penalty
- Initial $2800.00 · Current $1960.00 Reduced
General-duty citation text
29 CFR 1926.652(a)(1): Each employee in an excavation was not protected from cave-ins by an adequate protective system designed in accordance with 29 CFR 1926.652(c). The employer does not ensure that each employee in an excavation is protected from cave-ins by an adequate protective system. a) This violation occurred on or about December 5, 2012, on the short leg of the trench measuring 8 feet in depth where employees were exposed to crushed-by hazards when grading the depth of the trench without providing a cave-in protection system. b) This violation occurred on or about December 5, 2012, on the long leg of the trench measuring 7 feet, 1 inch in depth where employees were exposed to crushed-by hazards when grading the depth of the trench without providing a cave-in protection system. Pursuant to 29 C.F. R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that each employee in an excavation is protected from cave-ins by an adequate protective system.
Recent events (2)
- — I (S) $1960
- — Z (S) $2800
1926.1053 B04
- Issued
- Abate by
- Penalty
- Initial $2400.00 · Current $1680.00 Reduced
General-duty citation text
29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed: The employer does not ensure that ladders are used for purposes for which they are designed. This violation occurred on or about December 5, 2012, on the north wall of a trench measuring 7 feet, 1 inch in depth where employees were exposed to fall hazards when grading the depth of the trench without using a proper ladder. Pursuant to 29 C.F. R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that ladders are used for purposes for which they are designed.
Recent events (2)
- — I (S) $1680
- — Z (S) $2400
More inspections in this industry (NAICS 238220)
SAN MARCOS, TX—2026-07-16
CASA MECHANICAL SERVICES, LTD.
RIO RANCHO, NM—2026-07-15
PROFESSIONAL STUCCO & SERVICE INC.
BROOKLYN, NY—2026-07-15
DILIGENT AC LLC
PARKVILLE, MD—2026-07-15
AMERICAN AUTOMATIC SPRINKLER COMPANY, INC.
SACRAMENTO, CA—2026-07-15
J.R. PIERCE PLUMBING CO., INC. OF SACRAMENTO
More inspections in TX
WICHITA FALLS, TX—2026-07-16
UNITED RENTALS, INC.
SAN MARCOS, TX—2026-07-16
CASA MECHANICAL SERVICES, LTD.
CLARKSVILLE, TX—2026-07-15
SEQUOIAS TREE EXPERT LLC
EL PASO, TX—2026-07-15
SURE STEEL
CORPUS CHRISTI, TX—2026-07-15
NORTH STAR ENERGY SOLUTIONS LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337703458.