Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JIM LEDERER'S BODY SHOP

Follow-up inspection · Health discipline

On , OSHA opened a follow-up health inspection of JIM LEDERER'S BODY SHOP in 903 FAIR ST., BUCYRUS, OH 44820 (NAICS 811121). OSHA activity number 337792410.

Watch JIM Lederer'S Body Shop — free Get an email when a new federal OSHA severe-injury report for JIM Lederer'S Body Shop is published. One employer, no account, unsubscribe in one click.
Site address
903 FAIR ST.
City
BUCYRUS
State
OH
ZIP
44820
Mailing
903 FAIR ST., BUCYRUS, OH 44820
Inspection type
Follow-up (F)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811121
Employees
1
Ownership type
A

5 citations on file for this inspection.

1910.134 C01

Repeat Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2400.00 · Current $2400.00
29 CFR 1910.134(c)(1):   A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:      1.) On or about December 12, 2012, the employer did not develop and implement a written respiratory protection program which covered an employee who wore a half face respirator while performing paint spraying operations.      Jim Lederer's Body Shop was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.134(c)(1), which was contained in OSHA Inspection Number 108572, citation number 1,  item number 1a and was affirmed as a final order on May 14, 2012, with respect to a workplace located at 903 Fair St., Bucyrus OH.
Recent events (1)
  • — Z (R) $2400

1910.134 E01

Repeat Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(e)(1):   The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:     1.)   On or about December 12, 2012, the employer did not ensure a medical evaluation was provided to an employee who was required to wear a half face respirator while performing paint spraying operations.    Jim Lederer's Body Shop was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.134(e)(1), which was contained in OSHA Inspection Number 108572, citation number 1,  item number 1b and was affirmed as a final order on May 14, 2012, with respect to a workplace located at 903 Fair St., Bucyrus OH.
Recent events (1)
  • — Z (R) $0

1910.134 F01

Repeat Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(f)(1):   The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT):        1.) On or about December 12, 2012, the employer did not ensure an employee who wore a half face respirator while performing paint spraying operations was required to pass an appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT).      Jim Lederer's Body Shop was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.134(f)(1), which was contained in OSHA Inspection Number 108572, citation number 1,  item number 1c and was affirmed as a final order on May 14, 2012, with respect to a workplace located at 903 Fair St., Bucyrus OH.
Recent events (1)
  • — Z (R) $0

1910.1200 E01

Repeat Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2400.00 · Current $2400.00
29 CFR 1910.1200(e)(1):   The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) for labels and other forms of warning, material safety data sheets, and employee information and training will be met:    1.) On or about December 12, 2012, the employer did not develop and implement a written hazard communication program which covers employees exposed to chemicals such as but not limited to lacquer thinner containing naphtha, toluene, and acetone during the auto body painting operation.      Jim Lederer's Body Shop was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.1200(e)(1), which was contained in OSHA Inspection Number 108572, citation number 1,  item number 2a and was affirmed as a final order on May 14, 2012, with respect to a workplace located at 903 Fair St., Bucyrus OH.
Recent events (1)
  • — Z (R) $2400

1910.1200 H01

Repeat Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(h)(1):   Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:    1.)  On or about December 12, 2012, the employer did not ensure employees received information and training on hazardous chemicals in their work area.  Employees were exposed to flammable chemicals such as but not limited to  lacquer thinner containing naphtha, toluene, and acetone during the auto body painting operation.    Jim Lederer's Body Shop was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.1200(h)(1), which was contained in OSHA Inspection Number 108572, citation number 1,  item number 2b and was affirmed as a final order on May 14, 2012, with respect to a workplace located at 903 Fair St., Bucyrus OH.
Recent events (1)
  • — Z (R) $0

View JIM LEDERER'S BODY SHOP's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337792410.