1,224,460Inspections Most recent open 2026-07-13 Last loaded 2026-07-16
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: NORTHLAND TOOL AND ELECTRONICS, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of NORTHLAND TOOL AND ELECTRONICS, INC. in 117 GOULD ROAD, WEARE, NH 03281 (NAICS 811310). OSHA activity number 337917413.

Watch Northland Tool AND Electronics, INC. — free Get an email when a new federal OSHA severe-injury report for Northland Tool AND Electronics, INC. is published. One employer, no account, unsubscribe in one click.
Site address
117 GOULD ROAD
City
WEARE
State
NH
ZIP
03281
Mailing
117 GOULD ROAD, WEARE, NH 03281
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811310
Employees
22
Ownership type
A

6 citations on file for this inspection.

1910.106 E06 I

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1020.00 · Current $714.00 Reduced
29 CFR 1910.106(e)(6)(i):     Adequate precautions were not taken to prevent the ignition of flammable vapors:         a.     Drum Rack Area - Containers of flammable liquids were not electrically interconnected prior to transferring.
Recent events (2)
  • — I (S) $714
  • — Z (S) $1020

1910.134 E01

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1200.00 · Current $840.00 Reduced
29 CFR 1910.134(e)(1):     The employer did not provide a medical evaluation to determine the employees' ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:         a.     Establishment - Employees wearing required-use respirators in the grinding room had not been medically evaluated to determine their ability to use a respirator.      Note:  The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator.
Recent events (2)
  • — I (S) $840
  • — Z (S) $1200

1910.134 F01

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(f)(1):     The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT):         a.     Establishment - Employees wearing required-use respirators in the grinding room had not been fit tested for the tight-fitting respirators.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.242 B

Serious Gravity 5 1 instance 12 exposed
Issued
Abate by
Penalty
Initial $2400.00 · Current $1680.00 Reduced
29 CFR 1910.242(b):     Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:         a.     Grinding Room - Compressed air used for cleaning measured greater than 100 p.s.i.
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2400

1910.252 B02 III

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $1120.00 Reduced
29 CFR 1910.252(b)(2)(iii):     Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields:         a.     Production area - Screens or shields were not used during welding on 12/17/12 to protect other employees adjacent to the welding area from the welding rays.
Recent events (2)
  • — I (S) $1120
  • — Z (S) $1600

1910.134 C01

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(c)(1):     A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:         a.     Establishment - A written respirator program had not been developed and implemented for employees wearing required-use respirators in the grinding room.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View NORTHLAND TOOL AND ELECTRONICS, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337917413.