Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: CELLU TISSUE CORP. NATURAL DAM

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of CELLU TISSUE CORP. NATURAL DAM in 4921 STATE HIGHWAY 58N, GOUVERNEUR, NY 13642 (NAICS 322121). OSHA activity number 338740632.

Watch Cellu Tissue Corp. Natural DAM — free Get an email when a new federal OSHA severe-injury report for Cellu Tissue Corp. Natural DAM is published. One employer, no account, unsubscribe in one click.
Site address
4921 STATE HIGHWAY 58N
City
GOUVERNEUR
State
NY
ZIP
13642
Mailing
4921 STATE HIGHWAY 58N, GOUVERNEUR, NY 13642
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
322121
Employees
93
Ownership type
A

6 citations on file for this inspection.

1910.22 A02

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $4000.00 · Current $4000.00
29 CFR 1910.22(a)(2): Floor(s) of workroom(s) were not maintained in a clean and, so far as possible, a dry condition:    a) On or about 2/5/2013, Near Pulper #4:  The floor was wet and had a visible layer of "sludge" on it, allowing for a slippery condition.    Abatement certification is required for this item.
Recent events (3)
  • — J (S) $4000
  • — C (S) $4000
  • — Z (S) $4000

1910.178 N08

Deleted Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.178(n)(8): Powered industrial trucks were not operated at a speed that allowed for stopping in a safe manner:    a) On or about 2/5/2013, Near Pulper #4:  The powered industrial trucks were being operated on a floor that was wet and had a visible layer of "sludge" on it,  which prevented them from stopping in a safe manner.    Abatement certification is required for this item.
Recent events (3)
  • — J (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.37 B04

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $4000.00 · Current $0.00 Reduced
29 CFR 1910.37(b)(4): Signs were not posted along the exit access indicating the direction of travel to the nearest exit and exit discharge when the direction of travel to the exit or exit discharge was not immediately apparent:    a) On or about 2/5/2013, Basement:  The exit path(s) from the basement were not labeled.     Abatement certification is required for this item.
Recent events (3)
  • — J (S) $0
  • — C (S) $4000
  • — Z (S) $4000

1910.147 C04 I

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4000.00 · Current $0.00 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    a) On or about 2/5/2013, Beloit #2 Rewinder:  Employees were not locking out pneumatics prior to performing blade changing operations.        Abatement certification is required for this item.
Recent events (3)
  • — J (S) $0
  • — C (S) $4000
  • — Z (S) $4000

1910.212 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4000.00 · Current $4000.00
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    a) On or about 2/5/2013, Core Cutting Area:  In going nip points were not guarded on the Appleton Core Cutter.        Abatement certification is required for this item.
Recent events (3)
  • — J (S) $4000
  • — C (S) $4000
  • — Z (S) $4000

1910.261 K02 II

Serious Gravity 5 3 instances 2 exposed
Issued
Abate by
Penalty
Initial $5000.00 · Current $5000.00
29 CFR 1910.261(k)(2)(ii): Ends of rotating shafts were not completely guarded:    a) On or about 2/5/2013, Beloit #2 Rewinder:  Three shaft ends located between the rewinder and the wall were not guarded.        Abatement certification is required for this item.
Recent events (3)
  • — J (S) $5000
  • — C (S) $5000
  • — Z (S) $5000

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338740632.