OSHA Inspection: HUMBERTO DELIRA

Issued

2013-07-16 00:00:00

Abate by

2013-08-16 00:00:00

Penalty

Initial $400.00 · Current $400.00

General-duty citation text

29 CFR 1903.19(c)(1):  The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:     Humberto Delira dba Delira Construction failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:     Citation Number                     Item Number                           Abatement Date  01                                            02a                                          04/24/2013  01                                            02b                                          04/24/2013  01                                            02c                                          04/24/2013  01                                            03                                            03/28/2013 01                                            04a                                          03/28/2013   01                                            04b                                          03/28/2013    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2013-03-22 00:00:00

Penalty

Initial $2800.00 · Current $2800.00

General-duty citation text

29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level:    a)  Employees were exposed to the hazard of falling while performing steel erection work from tubular welded frame scaffold platform elevated approximately 26 feet above the ground.      No abatement certification or documentation is required for this item.

Issued

2013-03-22 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.760(a)(1):  Each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, or fall restraint systems.    a)  Employees engaged in steel erection activity were not protected from fall hazards of up to approximately 21 feet to the ground, while working along unprotected edges of the balcony.     No abatement certification or documentation is required for this item.

Issued

2013-03-22 00:00:00

Abate by

2013-04-24 00:00:00

Penalty

Initial $2000.00 · Current $2000.00

General-duty citation text

29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:    a)  Employer did not provide training to each employee in order to recognize hazards associated with working from tubular welded frame scaffolding and to understand procedures to control or minimize those hazards.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2013-03-22 00:00:00

Abate by

2013-04-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.761(b):  The employer did not provide a training program for each employee who might be exposed to fall hazards:    a)  Employer did not provide training to each employee engaged in steel erection activity in order to recognize hazards associated with working at an elevation and to understand procedures to control or minimize those hazards.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2013-03-22 00:00:00

Abate by

2013-04-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.1060(a):  The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards:    a) Employer did not provide training program to each employee in order to recognize hazards associated with working from ladders, and to understand procedures to control or minimize those hazards.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2013-03-22 00:00:00

Abate by

2013-03-28 00:00:00

Penalty

Initial $2000.00 · Current $2000.00

General-duty citation text

29 CFR 1926.1052(c)(1):  Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with at least one handrail and one stairrail system along each unprotected side or edge:    a)  Employees were exposed to the hazard of falling while using stairways that were not equipped with a stairrail system.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2013-03-22 00:00:00

Abate by

2013-03-28 00:00:00

Penalty

Initial $2000.00 · Current $2000.00

General-duty citation text

29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed:    a)  Employees were using a stepladder without its metal spreaders locked in an open position.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2013-03-22 00:00:00

Abate by

2013-03-28 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.1053(b)(6):  Ladders were used on surfaces which were not stable and level:    a)  Employees were using a stepladder that was supported by unstable objects.        In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).