OSHA Inspection: CAIN MANUFACTURING COMPANY, INC.

Issued

2013-05-22 00:00:00

Abate by

2013-06-27 00:00:00

Penalty

Initial $2000.00 · Current $1100.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:      (a) On or about 02/13/13 - Press room, periodic inspections were not conducted on energy control procedures for equipment such as, but not limited to, mechanical power presses.

Issued

2013-05-22 00:00:00

Abate by

2013-05-22 00:00:00

Penalty

Initial $2000.00 · Current $1100.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:      (a) On or about 02/13/13 - Machine shop, a horizontal band saw did not have the unused portions of the blade guarded.

Issued

2013-05-22 00:00:00

Abate by

2013-05-22 00:00:00

Penalty

Initial $2000.00 · Current $1100.00 Reduced

General-duty citation text

29 CFR 1910.217(b)(4)(i): Pedal mechanism(s) on mechanical power press(es) full revolution clutches were not protected to prevent unintended operation from falling or moving objects or by accidental stepping onto the pedals:      (a) On or about 02/13/13 - Press room, a full revolution mechanical power press did not have a guard installed on the foot activation pedal.

Issued

2013-05-22 00:00:00

Abate by

2013-06-18 00:00:00

Penalty

Initial $2000.00 · Current $1100.00 Reduced

General-duty citation text

29 CFR 1910.217(b)(8)(i): Power press control system(s) on mechanical power press(es) were not provided with main power disconnect switch(es), capable of being locked only in the off position:      (a) On or about 02/13/13 - Press room, main power disconnect switches were not provided for several mechanical power presses.

Issued

2013-05-22 00:00:00

Abate by

2013-05-22 00:00:00

Penalty

Initial $2000.00 · Current $1100.00 Reduced

General-duty citation text

29 CFR 1910.217(c)(2)(i)(a): Point of operation guard(s) on mechanical power press(es) did not prevent entry of hands or fingers into the point of operation by reaching through, over, under or around the guard(s):      (a) On or about 02/13/13 - Press room, a mechanical power press did not have the point of operation guarded.