HONOLULU, HI —
OSHA Inspection: OAHU WASTE SERVICES INC
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of OAHU WASTE SERVICES INC in 1169 MIKOLE ST., HONOLULU, HI 96819 (NAICS 562111). OSHA activity number 338943012.
Where did this inspection happen?
- Establishment
- OAHU WASTE SERVICES INC
- Site address
- 1169 MIKOLE ST.
- City
- HONOLULU
- State
- HI
- ZIP
- 96819
- Mailing
- 1169 MIKOLE ST., HONOLULU, HI 96819
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 562111
- Employees
- 200
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.134 E01
- Issued
- Abate by
- Penalty
- Initial $2754.00 · Current $2000.00 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) At the facility, on or about March 7, 2013, and at times prior to, where the employer did not ensure that employees were provided with a medical evaluation prior to using 3M half-face respirators. Employees used the half-face respirators to perform spray painting tasks at the facility. This condition exposed employees to respiratory hazards.
Recent events (2)
- — I (S) $2000
- — Z (S) $2754
1910.134 F02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.134(f)(2): Employees using a tight-fitting facepiece respirator were not annually fit tested: a) At the facility, on or about March 7, 2013, and at times prior to, where the employer did not ensure that employees were fit tested at least annually. Employees used 3M half-face respirators to perform spray painting tasks on garbage trucks. This condition exposed employees to respiratory hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 H02 I
- Issued
- Abate by
- Penalty
- Initial $3443.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.134(h)(2)(i): Respirators were not stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals or were not packed or stored to prevent deformation of the facepiece and exhalation valve: a) At the facility, on or about March 7, 2013, and at times prior to, where the employer did not ensure that employees properly stored their respirators to prevent contamination. An employee left his respirator on top of a tool box in the maintenance area uncovered. This condition exposed employees to respiratory hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $3443
1910.157 C04
- Issued
- Penalty
- Initial $2754.00 · Current $2000.00 Reduced
General-duty citation text
29 CFR 1910.157(c)(4): Portable fire extinguishers were not maintained in a fully charged and operable condition: a) At the facility in the welding area, on March 6, 2013, where the employer did not ensure that a portable fire extinguisher was maintained in a fully charged condition. This condition exposed the employees to a fire hazard.
Recent events (2)
- — I (S) $2000
- — Z (S) $2754
1910.252 A02 II
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.252(a)(2)(ii): Suitable extinguishing equipment was not maintained in a state of readiness for instant use: a) At the facility in the welding area, on March 6, 2013, where the employer did not ensure that a portable fire extinguisher was maintained in a fully charged condition. This condition exposed the employees to a fire hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L04 III
- Issued
- Abate by
- Penalty
- Initial $2066.00 · Current $1500.00 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) At the facility, on March 6, 2013, where an employee had not received a forklift evaluation at least once every three years. An employee was operating a Caterpillar forklift, serial #5NG00518, model #V40E, to relocate a engine part. This condition exposed employees to a struck-by hazard.
Recent events (2)
- — I (S) $1500
- — Z (S) $2066
1910.253 B04 III
- Issued
- Penalty
- Initial $2754.00 · Current $2000.00 Reduced
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour: a) At the facility in the welding area, on March 6, 2013, where employees stored oxygen and acetylene cylinders in the same area without a noncombustible separation barrier. This condition exposed the employees to a fire hazard.
Recent events (2)
- — I (S) $2000
- — Z (S) $2754
1910.305 G02 III
- Issued
- Penalty
- Initial $4131.00 · Current $3000.00 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: a) At the facility, in the welding shop area, on March 6, 2013, where the plug on the flexible cord was not equipped with a strain relief. The flexible cord was attached to a Miller Millermatic 251 wire welding machine. This condition exposed the employees to an electrical hazard.
Recent events (2)
- — I (S) $3000
- — Z (S) $4131
1910.334 A02 II
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposes an employee to injury and the defective or damaged item was not removed from service: a) At the facility, in the welding shop area, on March 6, 2013, where an employee used a Miller Millermatic 251 wire welding machine that was defective. The plug on the flexible cord was not equipped with a strain relief. This condition exposed the employees to an electrical hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 562111)
EDEN PRAIRIE, MN—2026-07-09
111566 - JUNK MASTERS LLC
TOA BAJA, PR—2026-07-09
CONSOLIDATED WASTE SERVICE LLC
SOMERS, CT—2026-07-08
F&G RECYCLING LLC
SAN RAFAEL, CA—2026-07-08
RG ENVIRONMENTAL HOLDINGS INC.
LANSING, IL—2026-07-06
TITAN PARTNERS CHICAGO, LLC
More inspections in HI
KAILUA, HI—2026-07-08
HELEMAI LAWN & GARDEN
MAKAWAO, HI—2026-07-01
HALIIMAILE PINEAPPLE COMPANY LTD
HONOLULU, HI—2026-06-29
GP ENERGY COMPANY LLC
HONOLULU, HI—2026-06-26
PAN PACIFIC RETAIL MANAGEMENT (HAWAII) CORPORATION
KAHUKU, HI—2026-06-25
HAWAII WORKS INC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338943012.