OSHA Inspection: SHAW GLASS HOLDINGS, LLC

Issued

2013-08-12 00:00:00

Abate by

2013-10-01 00:00:00

Penalty

Initial $3300.00 · Current $2310.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:  Worksite:             The employer did not retrain all powered industrial truck operators within three years.

Issued

2013-08-12 00:00:00

Abate by

2013-12-30 00:00:00

Penalty

Initial $3300.00 · Current $2310.00 Reduced

General-duty citation text

29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition:    Shipping Area:               A Toyota Forklift was used with a boom attachment which was not secured to the forklift.

Issued

2013-08-12 00:00:00

Abate by

2013-10-01 00:00:00

Penalty

Initial $4400.00 · Current $3080.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    Cutting Area:                       The chain rail at the operator side of the Master Edge CNC Glasscutting machine was not connected while the machine was running.

Issued

2013-08-12 00:00:00

Abate by

2013-12-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:    Shipping Area:                 A Toyota Forklift was used with a boom attachment to load trucks without the manufacturer's prior written approval.

Issued

2013-08-12 00:00:00

Abate by

2013-12-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered:    Worksite:                 The Toyota Forklift was not marked to identify the attachments and did not have a plate to show the approximate weight of the truck and attachment combination at maximum elevation with the load laterally centered.