OSHA Inspection: EXPERTIZE MASONRY, INC.

Issued

2013-04-22 00:00:00

Abate by

2013-04-26 00:00:00

Penalty

Initial $2200.00 · Current $2200.00

General-duty citation text

29 CFR 1926.451(c)(1):  Supported scaffold(s) with a height to base width (including outrigger supports) ratio greater than four to one (4:1) was not restrained from tipping by guying, tying, bracing, or equivalent means:  a) Subcontractor's employees were exposed to fall hazards of approximately 30 feet while working on a frame scaffold which was not restrained from toppling by any means. The scaffold was approximately 30 feet high by 5 feet wide.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2013-04-22 00:00:00

Abate by

2013-04-26 00:00:00

Penalty

Initial $3080.00 · Current $3080.00

General-duty citation text

29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level.    a) Subcontractor's employees were exposed to the hazard of falling while performing masonry work from tubular welded frame scaffold platform elevated approximately 30 feet above the ground.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.