Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: WILLIAMS & WILLIAMS CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of WILLIAMS & WILLIAMS CONSTRUCTION in 23300 HIGHWAY 160, WALSENBURG, CO 81089 (NAICS 238120). OSHA activity number 338986789.

Watch Williams & Williams Construction — free Get an email when a new federal OSHA severe-injury report for Williams & Williams Construction is published. One employer, no account, unsubscribe in one click.
Site address
23300 HIGHWAY 160
City
WALSENBURG
State
CO
ZIP
81089
Mailing
2900 SILOMA RD., PUEBLO, CO 81005
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238120
Employees
3
Ownership type
A

3 citations on file for this inspection.

1926.760 B03

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $2000.00
29 CFR 1926.760(b)(3): Each connector working at heights over 15 and up to 30 feet above a lower level, was not provided with a personal fall arrest system, positioning device system or fall restraint system and was not wearing the equipment necessary to be able to be tied off; nor were they provided with other means of protection from fall hazards in accordance with paragraph (a)(1) of this section:    (a)  On or about March 28, 2013, and at times prior, the employer did not ensure that connectors working at 17 feet above the ground and exposed to fall hazards were wearing equipment necessary to tie off while reengineering the purlin clips and drilling new holes on a systems-engineered metal building being erected at 23300 Highway 160 in Walsenburg, Colorado.        Abatement Note: Abatement certification is required for this item (see enclosed Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (O) $2000
  • — Z (S) $2000

1926.761 C02 I

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.761(c)(2)(i):  Connectors were not trained about the nature of the hazards associated with connecting:     (a)  On or about March 28, 2013, and at times prior, the employer had not trained connectors working at 17 feet above the ground about the hazards associated with the tasks of a connector and how to mitigate the hazards.      Abatement Note: Abatement certification is required for this item (see enclosed Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1926.761 C02 II

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.761(c)(2)(ii): Connectors were not trained about the establishment, access, proper connecting techniques and work practices required by 29 CFR 1926.756(c) and 1926.760(b):    (a)  On or about March 28, 2013, and at times prior, the employer had not trained connectors working at 17 feet above the ground about the proper way to access the working level leading to an employee being exposed to fall hazards while climbing the columns and temporary bracing.      Abatement Note: Abatement certification is required for this item (see enclosed Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

View WILLIAMS & WILLIAMS CONSTRUCTION's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338986789.