OSHA Inspection: JERRY'S WELDING INC.

Issued

2013-09-03 00:00:00

Abate by

2013-09-13 00:00:00

Penalty

Initial $1600.00 · Current $1600.00

General-duty citation text

29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:    Facility: The storage platform measuring twelve feet high from ground was not guarded with a standard rail.    Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

2013-09-03 00:00:00

Abate by

2013-09-27 00:00:00

Penalty

Initial $2800.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.29(a)(3)(vii): Work levels 10 feet or higher above the ground or floor did not have  a guardrail of 2" x 4" nominal or the equivalent, installed no less than 36" or more than 42" high, with a mid-rail of 1"x 4" nominal lumber or equivalent:    Facility: A ten foot mobile metal ladder stand did not have a guardrail or mid rail installed.    Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

2013-09-03 00:00:00

Abate by

2013-09-27 00:00:00

Penalty

Initial $1200.00 · Current $300.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    Facility: The employer did not develop and implement a powered industrial vehicle training program for employees required to operator the vehicles safely.    Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

2013-09-03 00:00:00

Abate by

2013-09-13 00:00:00

Penalty

Initial $1600.00 · Current $500.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    Front of Shop: The vertical saw unused blade portion measuring nine inches was not guarded.    Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

2013-09-03 00:00:00

Abate by

2013-09-27 00:00:00

Penalty

Initial $1200.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work:    Facility: The Central Machinery 6 inch Bench Grinder did not have a work rest installed on the left hand side to support the work.    Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

2013-09-03 00:00:00

Abate by

2013-09-27 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:    The Central Machinery 6 inch Bench grinder did not have tongue guards installed on the right or left side.    Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).