Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: BUSINESS INTERIOR FLOOR COVERING, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of BUSINESS INTERIOR FLOOR COVERING, INC. in 16 EVERBERG ROAD, WOBURN, MA 01801 (NAICS 493110). OSHA activity number 339133704.

Watch Business Interior Floor Covering, INC. — free Get an email when a new federal OSHA severe-injury report for Business Interior Floor Covering, INC. is published. One employer, no account, unsubscribe in one click.
Site address
16 EVERBERG ROAD
City
WOBURN
State
MA
ZIP
01801
Mailing
16 EVERBERG ROAD, WOBURN, MA 01801
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
493110
Employees
28
Ownership type
A

6 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $3500.00 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees where employees were exposed to fall hazards:       Location: Warehouse    On or about 3/26/13, an employee fell while standing and working on top of the forks of the Nissan 30, model CUM01L1S5N forklift.
Recent events (2)
  • — I (S) $3500
  • — Z (S) $4900

1910.178 P01

Serious Gravity 1 2 instances 5 exposed
Issued
Abate by
Penalty
Initial $2100.00 · Current $1500.00 Reduced
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition.    Location:  Warehouse      On or about 6/24/13, the employer allowed operators to continue driving the Nissan 30, model CUM01L15SN and the Clark 25E, model GCX25E forklifts with the rubber pad missing from the gas pedal, back up lights broken, and the backup signal not working.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2100

1910.305 B01 II

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $3500.00 · Current $500.00 Reduced
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:    Location: Warehouse    On or about 6/24/13, the employer had missing blanks in the electrical cabinet exposing employees that work in the area to electrical shock and fire hazards.
Recent events (2)
  • — I (S) $500
  • — Z (S) $3500

1904.29 B01

Other-than-serious 1 instance 28 exposed
Issued
Penalty
Initial $595.00 · Current $200.00 Reduced
29 CFR 1904.29(b)(1): A log of all recordable work-related injuries and illness (OSHA Form 300 or equivalent) was not completed in the detail required by the regulation.    Located at 16 Everberg Road, Woburn, MA:      On or about 6/24/13, the employer did not adequately provide a specific description for the following recordable injuries recorded on the OSHA 300 log for Calendar Year 2013;      Case #1 - The employer did not provide a description of the injury and the object or substance that caused the injury.
Recent events (2)
  • — I (O) $200
  • — Z (O) $595

1910.178 A04

Other-than-serious 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:  Location:  Warehouse    On or about 6/24/13, the employer did not receive written approval from the manufacturer to utilize the boom extension on the Clark 25E, model GCX25E forklift.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.178 A05

Other-than-serious 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered:   Location:  Warehouse     On or about 6/24/13, the employer did not mark the Clark 25E, model GCX25E forklift to show the combined weight capacity of the forklift, while the boom attachment was utilized.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

SPEEDX

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339133704.