Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JMG CONSTRUCTION CORPORATION

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of JMG CONSTRUCTION CORPORATION in RAIL YARD AT HIGH STREET, CORNING, NY 14830 (NAICS 237990). OSHA activity number 339141228.

Watch JMG Construction Corporation — free Get an email when a new federal OSHA severe-injury report for JMG Construction Corporation is published. One employer, no account, unsubscribe in one click.
Site address
RAIL YARD AT HIGH STREET
City
CORNING
State
NY
ZIP
14830
Mailing
223 PORTER ROAD, POTTSTOWN, PA 19464
Inspection type
Federal Agency (M)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
237990
Employees
30
Ownership type
A

6 citations on file for this inspection.

1926.21 B02

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $3920.00 Reduced
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury:   a) On or about 6/17/2013, Norfolk Southern Siding:  An Employee was not provided with training regarding the recognition, avoidance or abatement of hazards associated with working on electrical distribution systems.    Abatement documentation is required for this item.
Recent events (2)
  • — I (S) $3920
  • — Z (S) $4900

1926.950 C01 I

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $3920.00 Reduced
29 CFR 1926.950(c)(1)(i): Employees were not insulated or guarded from the energized parts with gloves and sleeves rated for the voltage involved.      a) On or about 6/17/2013, Norfolk Southern Siding:  An employee in proximity to the transformer feeding a lighting circuit was not wearing any protective equipment, such as, but not limited to electrical insulated gloves with sleeves.    Abatement documentation is required for this item.
Recent events (2)
  • — I (S) $3920
  • — Z (S) $4900

1926.950 D01 III

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $3920.00 Reduced
29 CFR 1926.950(d)(1)(iii): After all designated switches and disconnectors have been opened, rendered inoperable, and tagged, visual inspection or tests were not conducted to insure that equipment or lines have been de-energized:    a) On or about 6/17/2013, Norfolk Southern Siding:  Testing of the transformer and power supplying the transformer feeding the lighting circuit was not conducted prior to performing work.
Recent events (2)
  • — I (S) $3920
  • — Z (S) $4900

1926.954 A

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.954(a): All conductors and equipment were not treated as energized until tested or otherwise determined to be deenergized or until grounded:   a) On or about 6/17/2013, Norfolk Southern Siding:  All of the conductors were not treated as energized until tested or grounded.      Abatement documentation is required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.951 C01

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $3920.00 Reduced
29 CFR 1926.951(c)(1): Portable conductive ladder(s) were used near energized lines or equipment:  a) On or about 6/17/2013, Norfolk Southern Siding:  An alumiinum extension ladder was used while perfoming work on a transformer feeding a lighting circuit, which was not de-energized.  Abatement documentation is required for this item.
Recent events (2)
  • — I (S) $3920
  • — Z (S) $4900

1926.1053 B10

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1053(b)(10): The tops of a non-self-supporting ladder were not placed with the two rails supported equally:   a) On or about 6/17/2013, Norfolk Southern Siding:  An aluminum extension ladder which was not equipped with a single support attachment, was used with a top rung placed against a utility pole.    Abatement documentation is required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339141228.