Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: DON'S CARPENTRY AND ROOFING LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of DON'S CARPENTRY AND ROOFING LLC in 1507 DIXWELL AVENUE, HAMDEN, CT 06514 (NAICS 238160). OSHA activity number 339146623.

Watch Don'S Carpentry AND Roofing LLC — free Get an email when a new federal OSHA severe-injury report for Don'S Carpentry AND Roofing LLC is published. One employer, no account, unsubscribe in one click.
Site address
1507 DIXWELL AVENUE
City
HAMDEN
State
CT
ZIP
06514
Mailing
12 GARDNERS LANE, ANSONIA, CT 06401
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
2
Ownership type
A

7 citations on file for this inspection.

1926.451 C02

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1400.00 Reduced
29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames, and uprights did not bear on base plates and mud sills or other adequate firm foundation:  JOBSITE:  The feet of the ladders of the ladderjack scaffold, used by employee to install roof shingles, were not placed on a solid sound surface.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2000

1926.451 F07

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1400.00 Reduced
29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration:; Such activities were not performed only by experienced and trained employees selected for such work by the competent person.   JOBSITE:  The ladder jack scaffold from which an employee was installing roof shingles was not erected under the supervision of a competent or qualified person.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2000

1926.451 G01 I

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1960.00 Reduced
29 CFR 1926.451(g)(1)(i): Each employee on a boatswains' chair, catenary scaffold, float scaffold, needle beam scaffold, or ladder jack scaffold was not protected by a personal fall arrest system:  JOBSITE:  The employee performing roofing work was exposed to the hazard of falling 20 feet 1 inch to the ground while working on the platform of a ladderjack scaffold without a personal fall arrest system.
Recent events (2)
  • — I (S) $1960
  • — Z (S) $2800

1926.452 K02

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1400.00 Reduced
29 CFR 1926.452(k)(2): Ladders used to support the ladderjack scaffolding did not meet the requirements of Sub-part X of this part Stairways and Ladders:  JOBSITE:  The horizontal distance to the vertical support to the base of the following two (2) ladders used as support ladders of the ladder jack scaffold used by an employee were greater than one fourth (1/4) of the working lengths of the ladders.  1. Werner 32 ft aluminum extension ladder, Model #D1332-2.  2. Werner 32 ft aluminum extension ladder, Model #D1532-2.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2000

1926.454 A

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1400.00 Reduced
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.  JOBSITE:  The employee, performing roofing work from a ladder jack scaffold did not receive training and information with ladder jack scaffolds.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2000

1926.1060 A

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would train each employee in the procedures to be followed to minimize hazards related to ladders and stairways:  JOBSITE:  The employee, using an aluminum extension ladder to have access to an upper working level was not provided with information and training regarding the safe use and handling of the ladder.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1053 B01

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $2800.00 · Current $1960.00 Reduced
29 CFR 1926.1053(b)(1): Where (a) portable ladder(s) was/were used for access to an upper level landing surface and the ladder(s) length did not allow the ladder side rails to extend at least 3 feet (0.9 m) above the upper landing surface being accessed, the ladder was not secured at its top to a rigid support that will not deflect, and/or a grasping device was not provided to assist employees in mounting and dismounting the ladder.  JOBSITE:  The 24 ft aluminum extension ladder used by the employee as a means of access to an upper landing surface when the side rails of the ladder did not extend 3 feet above the upper working surface the ladder was not secured at its top nor was a grasping device provided to assist employee in mounting and dismounting the ladder.
Recent events (2)
  • — I (S) $1960
  • — Z (S) $2800

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339146623.