BUFFALO, NY —
OSHA Inspection: SENECA LARKIN 701 LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SENECA LARKIN 701 LLC in LARKIN CENTER OF COMMERCE 701 SENECA STREET, BUFFALO, NY 14210 (NAICS 236220). OSHA activity number 339171324.
Where did this inspection happen?
- Establishment
- SENECA LARKIN 701 LLC
- Site address
- LARKIN CENTER OF COMMERCE 701 SENECA STREET
- City
- BUFFALO
- State
- NY
- ZIP
- 14210
- Mailing
- LARKIN CENTER OF COMMERCE 701 SENECA STREET, SUITE 200, BUFFALO, NY 14210
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 1
- Ownership type
- A
Citations
2 citations on file for this inspection.
1926.404 F06
- Issued
- Penalty
- Initial $1020.00 · Current $600.00 Reduced
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) On or about 7/09/13, in the "Bullpen Area" on the fourth floor of the Larkin Center of Commerce Building, 701 Seneca St.,Buffalo, NY: A Dayton 30 in. Circulator Fan, Model 6C539 was used to provide ventilation. The Fan was connected to 120-volt ac power via a series of extension cords. The plug on the cord of this Fan lacked a grounding prong. Seneca Larkin 701 LLC owned the fan and provided it for ventilation. Employees of other contractors walk by this fan daily. b) On or about 7/09/13, in the "Bathroom Area" on the fourth floor of the Larkin Center of Commerce Building, 701 Seneca St.,Buffalo, NY: A Leading Edge Fan, Model LPM3025 was used to provide ventilation. The Fan was connected to 120-volt ac power via a series of extension cords. The last extension cord in the series was a coiled yellow "2-wire cord" that did not contain a grounding conductor. This fan also contained two power cords with attached plugs, one of which was connected to 120 volt-ac power. The other plug was missing the ground prong & the neutral prong, but was not connected to power. Employees of other contractors walk by this fan daily. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $600
- — Z (S) $1020
1926.405 J03 II
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.405(j)(3)(ii): A means was not provided to disconnect each appliance: a) On or about 7/09/13, in the "Bullpen Area" on the fourth floor of the Larkin Center of Commerce Building, 701 Seneca St.,Buffalo, NY: A Dayton 30 in. Circulator Fan, Model 6C539 had a "pull chain disconnect switch" which was broken and would not shut off the fan when pulled. Employees disconnected the fan by unplugging it. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at SENECA LARKIN 701 LLC
BUFFALO, NY—2011-01-07 00:00:00
SENECA LARKIN 701, LLC.
View SENECA LARKIN 701 LLC's full OSHA safety record →
More inspections in this industry (NAICS 236220)
NEWPORT BEACH, CA—2026-07-16
KPRS CONSTRUCTION SERVICES, INC.
CHANDLER, AZ—2026-07-16
SUN STATE BUILDERS
ROCHESTER HILLS, MI—2026-07-16
ICON RESTORATION SERVICES
WAUSAU, WI—2026-07-16
MIRON CONSTRUCTION CO. INC.
PONCE, PR—2026-07-15
FC CONSTRUCTION LLC
More inspections in NY
MAYVILLE, NY—2026-07-16
MAYVILLE VILLAGE DPW
NEW HYDE PARK, NY—2026-07-16
NORTH HEMPSTEAD TN MICHAEL J TULLY PARK
CONESUS, NY—2026-07-16
CONESUS TN HIGHWAY DEPT
COMSTOCK, NY—2026-07-15
NYSDOCCS WASHINGTON CORRECTIONAL FACILITY
BALDWINSVILLE, NY—2026-07-15
LYSANDER TOWN HIGHWAY DEPARTMENT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339171324.