OSHA Inspection: DYER DISPLAYS, INC.

Issued

2013-09-30 00:00:00

Abate by

2013-10-04 00:00:00

Penalty

Initial $1200.00 · Current $600.00 Reduced

General-duty citation text

29 CFR 1910.22(b)(1): Aisles and passageways were not kept clear and in good repairs, with no obstruction across or in aisles that could create a hazard:    (a) 134 Ferry St So. Grafton, MA: On or about July 15, 2013, the entry aisle to the production floor was obstructed by an electrical cord running across its entire width which is not in accordance with this subpart.

Issued

2013-09-30 00:00:00

Abate by

2013-10-25 00:00:00

Penalty

Initial $1600.00 · Current $800.00 Reduced

General-duty citation text

29 CFR 1910.134(c):The employer did not develop and/or implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use:    (a) 134 Ferry St So. Grafton, MA: On or about July 15, 2013, employees were observed using 1/2 face cartridge style respirators which were required by the employer, who had not performed any of the elements required by this subpart:

Issued

2013-09-30 00:00:00

Abate by

2013-10-04 00:00:00

Penalty

Initial $1600.00 · Current $800.00 Reduced

General-duty citation text

29 CFR 1910.157(c)(1): The employer provided portable fire extinguishers but did not maintain passage so that they are readily accessible to employees without subjecting the employees to possible injury:    (a) 134 Ferry St So. Grafton, MA: On or about July 15, 2013, the access to the fire extinguisher in the production area was obstructed by barrels, tables, sheets of wood, etc.,which is not in accordance with this subpart.

Issued

2013-09-30 00:00:00

Abate by

2013-10-25 00:00:00

Penalty

Initial $2000.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    (a) 134 Ferry St So. Grafton, MA: On or about July 15, 2013, the employer did not have any program to train or evaluate employees who were instructed to operate PIVs as part of their work function, which is not in accordance with this subpart:

Issued

2013-09-30 00:00:00

Abate by

2013-10-25 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(6):The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  (a) 134 Ferry St So. Grafton, MA: On or about July 15, 2013, the employer did not certify that each employee who operates a PIV was trained and evaluated as required by in this paragraph.

Issued

2013-09-30 00:00:00

Abate by

2013-10-04 00:00:00

Penalty

Initial $2800.00 · Current $1400.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    (a) 134 Ferry St So. Grafton, MA: On or about July 15, 2013, the CNC router used at the facility had no operable guards to protect the employees from being struck by the moving arm of the cutter head,which is not in accordance with this subpart:    Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).

Issued

2013-09-30 00:00:00

Abate by

2013-10-04 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.213(d)(1): Each circular crosscut table saw was not guarded by a hood which shall meet all the requirements of paragraph (c)(1) of this section for hoods for circular ripsaws:  (a) 134 Ferry St So. Grafton, MA: On or about July 15, 2013, the 3 table saws on the production floor were not guarded in accordance with this subpart:   Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).

Issued

2013-09-30 00:00:00

Abate by

2013-10-04 00:00:00

Penalty

Initial $2800.00 · Current $1400.00 Reduced

General-duty citation text

29 CFR 1910.303(b)(2):Listed or labeled equipment was not installed and/or used in accordance with any instructions included in the listing or labeling:    (a) 134 Ferry St So. Grafton, MA: On or about July 15, 2013, electrical devices were placed into service contrary to their labeling and/or listing which is not in accordance with this subpart:     Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).

Issued

2013-09-30 00:00:00

Abate by

2013-10-08 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment to permit ready and safe operation and maintenance of such equipment:  (a) 134 Ferry St So. Grafton, MA: On or about July 15, 2013, three electrical panel boxes which feed the production floor were obstructed by wood, garbage and other debris, which is not in accordance with this subpart:    Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).

Issued

2013-09-30 00:00:00

Abate by

2013-10-08 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(g)(1)(iv)(A): Flexible cords were used as a substitute for the fixed wiring of a structure:  (a) 134 Ferry St So. Grafton, MA: On or about July 15, 2013, the time clock for production floor employees was permanently wired by an electrical extension cord running across the ceiling, which is not in accordance with this subpart:    Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).