OSHA Inspection: USDA, ANIMAL PLANT HEALTH INSPECTION SERVICES

Issued

2013-08-27 00:00:00

Abate by

2013-10-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:  a) At the APHIS warehouse there was a "JET" free standing 16 1/2 inch drill press not anchored to the floor.

Issued

2013-08-27 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:  a) At the APHIS warehouse there was a "Jet" bench grinder, model no. JBG-8A, ser no. 08020090 with the workrest   adjusted to one-half (1/2) inch from the wheel periphery.

Issued

2013-08-27 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  a) At the APHIS warehouse there was a "Jet" bench grinder, model no. JBG-8A, ser no. 08020090 with the tongue guard  adjusted to one and one-half (1 1/2) inch from the wheel periphery.

Issued

2013-08-27 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:  a) At the APHIS building office there was a permanently mounted re-locatable power tap daisy chained to a re-locatable power tap providing power to computers, FAX machine and printer.

Issued

2013-08-27 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating  at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i):  a) At the APHIS building, managers office there was a 110/120 VDC electrical outlet did not have a face plate.